Mechanical reasoning test for technical hiring
See how candidates reason about forces, movement and everyday mechanical systems.
- 10 āĻŽāĻŋāύāĻŋāĻ
- 21āĻāĻŋ āĻĒā§āϰāĻļā§āύ
- āĻŽāĻžāĻāĻžāϰāĻŋ
- āĻŦāĻšā§āύāĻŋāϰā§āĻŦāĻžāĻāύā§, āĻāĻŦāĻŋ āĻŦā§āĻā§ āύā§āĻāϝāĻŧāĻž
- āĻāĻāϰā§āĻāĻŋ āĻāĻžāώāĻžāϝāĻŧ āĻĒā§āϰāĻļā§āύ
- āĻĢā§āύ āĻ āĻĄā§āϏā§āĻāĻāĻĒ
āϏāĻāĻā§āώāĻŋāĻĒā§āϤ āĻāϤā§āϤāϰ
The Mechanical Reasoning assessment is a 10-minute, 21-question hiring test of forces and balance, motion and speed, and how gears, pulleys and wheels transmit movement. Each question shows a simple drawing and asks what happens or which way a part turns. Use it as evidence when hiring technicians, trades staff and engineering trainees.
āĻāĻāĻŋ āĻā§ āĻĒāϰāĻŋāĻŽāĻžāĻĒ āĻāϰā§
Understanding of forces, balance, motion and speed, and how gears, pulleys and wheels transmit movement.
Forces and balance
Questions cover how forces affect balance and what happens when a setup changes.
Motion and speed
Questions ask candidates to reason about moving objects and differences in motion and speed.
Gears, pulleys and wheels
Questions explore how gears, pulleys and wheels transmit movement, including which way parts turn.
āĻĒā§āϰāĻļā§āύā§āϰ āϧāϰāύ
āĻŦāĻšā§āύāĻŋāϰā§āĻŦāĻžāĻāύā§
āĻĒā§āϰāĻžāϰā§āĻĨā§: āĻāĻāĻāĻŋ āϏāĻāĻā§āώāĻŋāĻĒā§āϤ āĻĒāϰāĻŋāϏā§āĻĨāĻŋāϤāĻŋ, āϏāĻžāϰāĻŖāĻŋ āĻŦāĻž āĻŦāĻŋāĻŦā§āϤāĻŋ āĻĒāĻĄāĻŧā§ āϏāĻ āĻŋāĻ āĻāϤā§āϤāϰāĻāĻŋ, āĻ āĻĨāĻŦāĻž āϏāĻŦ āϏāĻ āĻŋāĻ āĻāϤā§āϤāϰ āĻŦā§āĻā§ āύā§āϝāĻŧāĨ¤
āĻāĻĒāύāĻŋ āĻĻā§āĻā§āύ: āĻĒā§āϰāĻžāϰā§āĻĨā§ āĻŦāĻŋāώāϝāĻŧāĻāĻŋ āĻļā§āϧ⧠āĻāĻŋāύāϤ⧠āĻĒāĻžāϰā§āύ āĻāĻŋ āύāĻž āύāϝāĻŧ, āĻāĻžāĻā§ āϞāĻžāĻāĻžāύā§āϰ āĻŽāϤ⧠āϝāĻĨā§āώā§āĻ āĻāĻžāϞā§āĻāĻžāĻŦā§ āĻāĻžāύā§āύ āĻāĻŋ āύāĻžāĨ¤
āĻāĻŦāĻŋ āĻŦā§āĻā§ āύā§āĻāϝāĻŧāĻž
āĻĒā§āϰāĻžāϰā§āĻĨā§: āĻāĻāĻāĻŋ āύāĻāĻļāĻž āĻŦāĻž āĻāĻŋāϤā§āϰ āĻĻā§āĻā§ āϤāĻžāϰ āϏāĻā§āĻā§ āĻŽāĻžāύāĻžāύāϏāĻ āĻāĻŦāĻŋāĻāĻŋ āĻŦā§āĻā§ āύā§āϝāĻŧāĨ¤
āĻāĻĒāύāĻŋ āĻĻā§āĻā§āύ: āĻĒāĻĄāĻŧāĻžāϰ āĻāĻĒāϰ āύāĻŋāϰā§āĻāϰ āύāĻž āĻāϰ⧠āĻāĻāĻžāϰ āĻ āύāĻāĻļāĻž āĻĻā§āĻā§ āϝā§āĻā§āϤāĻŋ āĻāϰāĻžāϰ āĻĻāĻā§āώāϤāĻžāĨ¤
10 āĻŽāĻŋāύāĻŋāĻā§ 21āĻāĻŋ āĻĒā§āϰāĻļā§āύ, āĻāĻāĻŦāĻžāϰ⧠āĻāĻāĻāĻŋ āĻāϰ⧠āĻĻā§āĻāĻžāύ⧠āĻšāϝāĻŧāĨ¤
āĻāĻ āĻĒāϰā§āĻā§āώāĻžāϰ āĻāĻĒāϝā§āĻā§ āĻĒāĻĻ
Hands-on technical roles such as maintenance and installation technicians, HVAC, electrical and plumbing trades, carpenters, welders, machine operators, machinists and vehicle mechanics, as well as engineering trainees, facility engineers and technical sales staff.
What this test can add to your hiring process
See applied reasoning, not just a resume
Questions show simple drawings of levers, ramps, moving objects, gears, belts or pulleys and ask what happens, which way something turns, or which setup needs less effort. You see how a candidate works through those situations, beyond what a resume lists.
Review more than one question style
Multiple-choice questions ask for the one right answer about a drawing. Picture-choice questions ask the candidate to pick the drawing that answers the question. Both rely on practical understanding of how things work, not memorized formulas.
Keep the assessment focused
The test takes 10 minutes and has 21 questions. It offers a short, consistent way to gather job-related evidence before deciding what to explore in an interview or work sample.
Use results to guide follow-up
Treat the score as a signal for a person to review, not as a hiring decision. Use it to choose relevant follow-up questions about practical situations, then consider the candidateâs evidence alongside other parts of your process.
āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϰāĻžāϰā§āĻĨā§āϰ āĻāύā§āϝ āĻāĻĒāύāĻŋ āϝāĻž āĻĒāĻžāĻŦā§āύ
- āĻĒā§āϰ⧠āϏāĻŽāϝāĻŧ āĻĒāϰā§āĻā§āώāĻžāϰ āĻā§āϝāĻžāĻŦā§āĻ āĻāĻŋāϞā§āύ
- āĻāĻĒāĻŋ-āĻĒā§āϏā§āĻ āĻāϰāĻž āĻāϤā§āϤāϰ āύā§āĻ
- āĻāĻāĻāĻžāύāĻž āĻāϤāĻŋāϤ⧠āĻāϤā§āϤāϰ āĻĻāĻŋāϝāĻŧā§āĻā§āύ
āϏā§āĻā§āϰ, āĻĒā§āϰā§āĻĢāĻžāĻāϞ āĻ āϏāϤāϤāĻžāϰ āϏāĻāĻā§āϤāĻā§āϞāĻŋ āϏāĻžāĻā§āώāĻžā§āĻāĻžāϰā§āϰ āĻĒāĻžāĻļāĻžāĻĒāĻžāĻļāĻŋ āĻāĻĒāύāĻžāϰ āĻĒāϰā§āϝāĻžāϞā§āĻāύāĻžāϰ āĻāύā§āϝ āĻĒā§āϰāĻŽāĻžāĻŖ, āĻāĻāύāĻ āϏā§āĻŦāϝāĻŧāĻāĻā§āϰāĻŋāϝāĻŧ āϏāĻŋāĻĻā§āϧāĻžāύā§āϤā§āϰ āĻāĻŋāϤā§āϤāĻŋ āύāϝāĻŧāĨ¤
āĻāĻ āĻā§āϏā§āĻāĻāĻŋ āĻŦāĻŋāύāĻžāĻŽā§āϞā§āϝ⧠āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰā§āύ
How the test handles integrity signals
Each attempt draws a different set of questions from large pools. Question order and answer options are shuffled. The browser receives one question at a time, and answer keys never reach it. Timing runs on the server, so a reload returns the same question with the time left. Candidates cannot copy question text, and blocked copies are recorded. Each candidate gets a personal link that expires. HireValid records signals such as time away from the test tab, pastes and very fast answers in an Integrity Score with a timeline for the employer to review; the score never decides. With candidate consent, an employer can add webcam photos. Questions are answered once, in order, with no going back.
āĻāĻŽāϰāĻž āϝā§āĻāĻžāĻŦā§ AI āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰ⧠āĻĒā§āϰāϤāĻžāϰāĻŖāĻž āĻ ā§āĻāĻžāĻ Âˇ āĻ āĻāĻŖā§āĻĄāϤāĻž-āϏāĻāĻā§āϰāĻžāύā§āϤ āϏāĻāĻā§āϤ
Use the score as one piece of evidence
Review the score alongside a role-relevant work sample and a structured interview. For example, a work sample could ask the candidate to explain or demonstrate how they would approach a practical situation relevant to the job. Keep the task appropriate to the role and use the same evaluation approach for each candidate. The mechanical reasoning test is not a pass mark or a stand-alone decision. Compare the evidence from the test with what you observe in the work sample and hear in the interview. For more context on using assessments in hiring, see the pre-employment testing guide.
Structured interview questions to explore
Tell me about a time you had to work out why a moving part or system was not behaving as expected. How did you approach it?
Listen for a clear account of the situation, the steps the candidate took to investigate, and how they checked what happened.
Describe a job task where balance, force or movement affected how you planned the work. What choices did you make?
Listen for a practical explanation tied to the candidateâs role and the reasoning behind their choices.
Tell me about a time you had to explain how a mechanical setup would move or turn to someone else. How did you make your explanation clear?
Listen for specific details about the setup, how the candidate communicated the movement, and how they responded to questions.
Walk me through a time you encountered an unfamiliar mechanical situation at work. What did you do next?
Listen for a grounded account of how the candidate gathered information, considered the situation and decided on a next step.
āϏā§āĻā§āϰāĻŋāĻ āĻ āĻŦā§āĻā§āĻāĻŽāĻžāϰā§āĻ āϏāĻŽā§āĻĒāϰā§āĻā§ āĻāĻžāύā§āύ
Roles and level this assessment fits
This intermediate test is intended for hands-on technical roles such as maintenance and installation technicians, HVAC, electrical and plumbing trades, carpenters, welders, machine operators, machinists and vehicle mechanics. It can also support hiring for engineering trainees, facility engineers and technical sales staff. Use it to gather evidence on practical mechanical reasoning, then relate that evidence to the actual responsibilities of the position.
What candidates see
Questions use simple drawings and short, plain sentences, so reading speed matters as little as possible. Situations draw on general experience of how objects move and balance, not a particular trade, tool brand or workshop habit. They do not rely on sports, money or local knowledge. Units are metric, numbers are small enough for scratch paper, and drawing parts are identified by letters and shapes rather than color. Candidates may use scratch paper. A four-question, four-minute practice set is available before the assessment.
Choose related evidence thoughtfully
The mechanical reasoning test focuses on forces, balance, motion, speed and how gears, pulleys and wheels transmit movement. If you also want evidence on patterns and shapes, consider Abstract Reasoning. For a separate look at reasoning with numbers, see Numerical Reasoning. These measure different areas, so select assessments based on the job rather than treating them as interchangeable.
āύā§āϝāĻžāϝā§āϝāϤāĻž āĻ āĻĒā§āϰāϝāĻŧā§āĻāύā§āϝāĻŧ āϏā§āĻŦāĻŋāϧāĻž
Questions use simple drawings and short, plain sentences, so reading speed matters as little as possible. Situations come from general experience of how objects move and balance rather than from any one trade, tool brand or workshop habit, and they never rely on sports, money or local knowledge. Units are metric, numbers are small enough for scratch paper, parts in the drawings are told apart by letters and shapes rather than color, and the people named come from many backgrounds and genders.
āϝā§āĻā§āϤāĻŋāϏāĻā§āĻāϤ āϏā§āĻŦāĻŋāϧāĻž āĻšāĻŋāϏā§āĻŦā§ āĻāĻĒāύāĻŋ āϝā§āĻā§āύ⧠āĻĒā§āϰāĻžāϰā§āĻĨā§āĻā§ āĻ āϤāĻŋāϰāĻŋāĻā§āϤ āϏāĻŽāϝāĻŧ āĻĻāĻŋāϤ⧠āĻĒāĻžāϰā§āύāĨ¤ āĻĢāϞāĻžāĻĢāϞ āĻāĻāĻāύ āĻŦā§āϝāĻā§āϤāĻŋāϰ āĻĒāϰā§āϝāĻžāϞā§āĻāύāĻžāϰ āĻāύā§āϝ āĻĒā§āϰāĻŽāĻžāĻŖ, āĻāĻāύāĻ āϏā§āĻŦāϝāĻŧāĻāĻā§āϰāĻŋāϝāĻŧ āϏāĻŋāĻĻā§āϧāĻžāύā§āϤ āύāϝāĻŧāĨ¤
Provisional: reliability is reported once 200 candidates have completed it.
āĻĒāϰā§āĻā§āώāĻžāϰ āĻŦāĻŋāĻŦāϰāĻŖ
A short, timed test of how well a candidate understands the way everyday machines and physical systems behave. Each question shows a simple drawing of levers, ramps, moving objects, gears, belts or pulleys and asks what happens, which way something turns, or which setup needs less effort. It looks at practical understanding of how things work, not at memorized formulas.
- āĻĒā§āϰāĻļā§āύāĻā§āϞāĻŋ āĻāĻāϰā§āĻāĻŋāϤā§āĨ¤
- āϝ⧠āϏāĻšāĻžāϝāĻŧāĻ āĻāĻĒāĻāϰāĻŖ āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰāĻž āϝāĻžāĻŦā§: āĻāϏāĻĄāĻŧāĻž āĻāϰāĻžāϰ āĻāĻžāĻāĻāĨ¤
- āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϰāĻļā§āύ āĻā§āϰāĻŽāĻžāύā§āϏāĻžāϰ⧠āĻāĻāĻŦāĻžāϰ āĻāϰ⧠āĻāϤā§āϤāϰ āĻĻāĻŋāϤ⧠āĻšāϝāĻŧāĨ¤ āĻāĻā§āϰ āĻĒā§āϰāĻļā§āύ⧠āĻĢāĻŋāϰ⧠āϝāĻžāĻāϝāĻŧāĻžāϰ āϏā§āϝā§āĻ āύā§āĻāĨ¤
- āϏāĻŽāϝāĻŧāĻŦāĻĻā§āϧ āĻĒāϰā§āĻā§āώāĻžāϰ āĻāĻā§ 4 āĻŽāĻŋāύāĻŋāĻā§ 4āĻāĻŋ āĻ āύā§āĻļā§āϞāύā§āϰ āĻĒā§āϰāĻļā§āύāĨ¤
āĻĒā§āϰāĻžāϝāĻŧāĻļāĻ āĻāĻŋāĻā§āĻāĻžāϏāĻŋāϤ āĻĒā§āϰāĻļā§āύ
What does the Mechanical Reasoning test measure?+
It measures understanding of forces and balance, motion and speed, and how gears, pulleys and wheels transmit movement. Each question shows a simple drawing and asks what happens, which way something turns, or which setup needs less effort. It looks at practical understanding of how things work, not recalling memorized formulas.
How long is the Mechanical Reasoning test?+
The assessment has 21 questions and a 10-minute time limit. Candidates cannot go back to earlier questions. A separate practice set has four questions and takes four minutes. Candidates may use scratch paper during the assessment.
Which roles suit the Mechanical Reasoning test?+
It is designed for intermediate hands-on technical roles, including maintenance and installation technicians, HVAC, electrical and plumbing trades, carpenters, welders, machine operators, machinists and vehicle mechanics. It can also be used for engineering trainees, facility engineers and technical sales staff. Match the evidence to the actual job duties.
What question formats are in the Mechanical Reasoning test?+
Multiple-choice questions ask candidates to choose the one right answer about a simple drawing. Picture-choice questions ask candidates to select the drawing that answers the question, such as the setup that needs less effort. Both formats keep reading short, so the mechanical reasoning test centers on how things move and balance.
Does the Mechanical Reasoning test require trade-specific experience?+
The questions use general situations about how objects move and balance rather than a particular trade, tool brand or workshop habit. They cover forces, motion, speed, gears, pulleys and wheels. That makes the test relevant to several technical roles, but you should still consider role-specific experience separately in your work sample and interview.
How should I use a Mechanical Reasoning test score?+
Use the score as evidence for a person to review, alongside a role-relevant work sample and structured interview. It is not a pass mark or a hiring decision by itself. Follow up on the candidateâs reasoning about movement, balance or mechanical setups, and consider the evidence in light of the positionâs responsibilities.
What kinds of drawings appear in the Mechanical Reasoning test?+
The drawings show levers, ramps, moving objects, gears, belts and pulleys. Candidates are asked what happens next, which way a part turns, or which setup needs less effort. Parts are told apart by letters and shapes rather than color, units are metric, and numbers are small enough to work out on scratch paper.
āĻ āϏāĻŽā§āĻĒāϰā§āĻāĻŋāϤ āĻĒāϰā§āĻā§āώāĻž
HVAC (āĻšāĻŋāĻāĻŋāĻ, āĻā§āύā§āĻāĻŋāϞā§āĻļāύ āĻ āĻāϝāĻŧāĻžāϰ āĻāύā§āĻĄāĻŋāĻļāύāĻŋāĻ)
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύSolidWorks
10 āĻŽāĻŋāύāĻŋāĻ, āϏāĻĢāĻāĻāϝāĻŧā§āϝāĻžāϰ-āϏāĻāĻā§āϰāĻžāύā§āϤ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύAutoCAD
10 āĻŽāĻŋāύāĻŋāĻ, āϏāĻĢāĻāĻāϝāĻŧā§āϝāĻžāϰ-āϏāĻāĻā§āϰāĻžāύā§āϤ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻā§āϝāĻžāĻŽāĻŋāϤāĻŋāĻ āĻŽāĻžāϤā§āϰāĻž āύāĻŋāϰā§āϧāĻžāϰāĻŖ āĻ āϏāĻšāύāĻļā§āϞāϤāĻž (GD&T)
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύAutodesk Revit
10 āĻŽāĻŋāύāĻŋāĻ, āϏāĻĢāĻāĻāϝāĻŧā§āϝāĻžāϰ-āϏāĻāĻā§āϰāĻžāύā§āϤ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāύāĻŋāϰā§āĻŽāĻžāĻŖ āĻŦā§āϝāĻŦāϏā§āĻĨāĻžāĻĒāύāĻž
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻĒāϰāĻŦāϰā§āϤ⧠āύāĻŋāϝāĻŧā§āĻā§ āϝāĻžāύā§āϤā§āϰāĻŋāĻ āϝā§āĻā§āϤāĻŋ āĻā§āϏā§āĻāĻāĻŋ āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰā§āύ
Free-āϏāĻš āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϞā§āϝāĻžāύā§āĻ āϏāĻŽā§āĻĒā§āϰā§āĻŖ āĻā§āϏā§āĻ āϞāĻžāĻāĻŦā§āϰā§āϰāĻŋ āϰāϝāĻŧā§āĻā§āĨ¤