GD&T drawing skills test for hiring
See how candidates interpret GD&T symbols, datums and tolerance zones in short drawing-based situations.
- 10 āĻŽāĻŋāύāĻŋāĻ
- 15āĻāĻŋ āĻĒā§āϰāĻļā§āύ
- āĻŽāĻžāĻāĻžāϰāĻŋ
- āĻŦāĻšā§āύāĻŋāϰā§āĻŦāĻžāĻāύā§
- āĻāĻāϰā§āĻāĻŋ āĻāĻžāώāĻžāϝāĻŧ āĻĒā§āϰāĻļā§āύ
- āĻĢā§āύ āĻ āĻĄā§āϏā§āĻāĻāĻĒ
āϏāĻāĻā§āώāĻŋāĻĒā§āϤ āĻāϤā§āϤāϰ
The GD&T test is a timed, intermediate hiring assessment for engineers, drafters and quality inspectors who work with mechanical drawings. It measures how candidates read symbols and modifiers, datum reference frames, and geometric tolerance types and zones. Multiple-choice questions use feature control frames, size limits and measured values to check applied drawing interpretation.
āĻāĻāĻŋ āĻā§ āĻĒāϰāĻŋāĻŽāĻžāĻĒ āĻāϰā§
Reading GD&T callouts: symbols and modifiers, datum reference frames, and the kinds of geometric tolerance and their zones.
Fundamentals and symbols
Questions check how candidates interpret GD&T symbols and modifiers in callouts, including what a feature control frame means.
Datum referencing
Candidates consider how datum references establish a frame for holding and interpreting a part.
Geometric tolerance types
Questions distinguish geometric tolerance types and their zones, including which tolerance applies and how much is available.
āĻĒā§āϰāĻļā§āύā§āϰ āϧāϰāύ
āĻŦāĻšā§āύāĻŋāϰā§āĻŦāĻžāĻāύā§
āĻĒā§āϰāĻžāϰā§āĻĨā§: āĻāĻāĻāĻŋ āϏāĻāĻā§āώāĻŋāĻĒā§āϤ āĻĒāϰāĻŋāϏā§āĻĨāĻŋāϤāĻŋ, āϏāĻžāϰāĻŖāĻŋ āĻŦāĻž āĻŦāĻŋāĻŦā§āϤāĻŋ āĻĒāĻĄāĻŧā§ āϏāĻ āĻŋāĻ āĻāϤā§āϤāϰāĻāĻŋ, āĻ āĻĨāĻŦāĻž āϏāĻŦ āϏāĻ āĻŋāĻ āĻāϤā§āϤāϰ āĻŦā§āĻā§ āύā§āϝāĻŧāĨ¤
āĻāĻĒāύāĻŋ āĻĻā§āĻā§āύ: āĻĒā§āϰāĻžāϰā§āĻĨā§ āĻŦāĻŋāώāϝāĻŧāĻāĻŋ āĻļā§āϧ⧠āĻāĻŋāύāϤ⧠āĻĒāĻžāϰā§āύ āĻāĻŋ āύāĻž āύāϝāĻŧ, āĻāĻžāĻā§ āϞāĻžāĻāĻžāύā§āϰ āĻŽāϤ⧠āϝāĻĨā§āώā§āĻ āĻāĻžāϞā§āĻāĻžāĻŦā§ āĻāĻžāύā§āύ āĻāĻŋ āύāĻžāĨ¤
10 āĻŽāĻŋāύāĻŋāĻā§ 15āĻāĻŋ āĻĒā§āϰāĻļā§āύ, āĻāĻāĻŦāĻžāϰ⧠āĻāĻāĻāĻŋ āĻāϰ⧠āĻĻā§āĻāĻžāύ⧠āĻšāϝāĻŧāĨ¤
āĻāĻ āĻĒāϰā§āĻā§āώāĻžāϰ āĻāĻĒāϝā§āĻā§ āĻĒāĻĻ
Mechanical, aerospace, product development and manufacturing engineers, mechanical design and CAD engineers, drafters, quality inspectors, and electrical engineers who work with mechanical drawings.
A focused check of drawing interpretation
See application, not just familiarity
A resume can list drawing experience, but it does not show how a candidate reads a feature control frame in context. This assessment asks candidates to interpret short situations, tables or statements and choose the right answer, or every right answer.
Check the details that matter in a drawing
The questions cover symbols and modifiers, datum reference frames, geometric tolerance types and tolerance zones. Candidates also work with feature control frames, size limits and measured values to explain what a callout means and how much tolerance is available.
Give the interview a specific starting point
Use the result to decide which drawing topics to explore further in a work sample or structured interview. It can help focus follow-up on a candidateâs interpretation of datums or tolerance zones, rather than relying only on a general account of experience.
Keep the assessment compact
The test has 15 questions and takes 10 minutes. A four-question practice set takes four minutes. That gives hiring teams a defined, short assessment to consider alongside other evidence, not a replacement for reviewing relevant work.
āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϰāĻžāϰā§āĻĨā§āϰ āĻāύā§āϝ āĻāĻĒāύāĻŋ āϝāĻž āĻĒāĻžāĻŦā§āύ
- āĻĒā§āϰ⧠āϏāĻŽāϝāĻŧ āĻĒāϰā§āĻā§āώāĻžāϰ āĻā§āϝāĻžāĻŦā§āĻ āĻāĻŋāϞā§āύ
- āĻāĻĒāĻŋ-āĻĒā§āϏā§āĻ āĻāϰāĻž āĻāϤā§āϤāϰ āύā§āĻ
- āĻāĻāĻāĻžāύāĻž āĻāϤāĻŋāϤ⧠āĻāϤā§āϤāϰ āĻĻāĻŋāϝāĻŧā§āĻā§āύ
āϏā§āĻā§āϰ, āĻĒā§āϰā§āĻĢāĻžāĻāϞ āĻ āϏāϤāϤāĻžāϰ āϏāĻāĻā§āϤāĻā§āϞāĻŋ āϏāĻžāĻā§āώāĻžā§āĻāĻžāϰā§āϰ āĻĒāĻžāĻļāĻžāĻĒāĻžāĻļāĻŋ āĻāĻĒāύāĻžāϰ āĻĒāϰā§āϝāĻžāϞā§āĻāύāĻžāϰ āĻāύā§āϝ āĻĒā§āϰāĻŽāĻžāĻŖ, āĻāĻāύāĻ āϏā§āĻŦāϝāĻŧāĻāĻā§āϰāĻŋāϝāĻŧ āϏāĻŋāĻĻā§āϧāĻžāύā§āϤā§āϰ āĻāĻŋāϤā§āϤāĻŋ āύāϝāĻŧāĨ¤
āĻāĻ āĻā§āϏā§āĻāĻāĻŋ āĻŦāĻŋāύāĻžāĻŽā§āϞā§āϝ⧠āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰā§āύ
An assessment with integrity signals for review
Each candidate receives a different set of questions drawn from large question pools. Questions appear in a different order for each attempt, and answer options are shuffled. The browser receives one question at a time, and answer keys stay on HireValidâs servers. The GD&T test is timed on the server; reloading returns the same question with only the remaining time, and candidates cannot go back to earlier questions. Question text cannot be copied or selected, and a blocked copy attempt is recorded in the timeline. Each invitation link is personal and expires, and a finished test cannot be taken again. HireValid can summarize signals such as time away from the test tab, pastes into answers and answers faster than a question can be read in an Integrity Score with an evidence timeline. The employer reviews those signals; the system does not decide on its own. With candidate consent, an employer can add webcam photos at random moments.
āĻāĻŽāϰāĻž āϝā§āĻāĻžāĻŦā§ AI āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰ⧠āĻĒā§āϰāϤāĻžāϰāĻŖāĻž āĻ ā§āĻāĻžāĻ Âˇ āĻ āĻāĻŖā§āĻĄāϤāĻž-āϏāĻāĻā§āϰāĻžāύā§āϤ āϏāĻāĻā§āϤ
Treat the score as evidence to review
Use the score as one input, not as a pass mark or a decision by itself. Review it alongside a relevant work sample and a structured interview. For example, ask the candidate to interpret a generic drawing or callout relevant to the role, then invite them to explain how they reached their conclusion. Compare that explanation with the assessment areas: symbols and modifiers, datum references, or tolerance types and zones. Look for clear reasoning and a sound connection between the drawing information and the answer, while making room to check any area the test does not cover. Keep the same job-related prompts and evaluation approach for candidates applying to the same role. For a broader engineering context, you could pair the result with the Mechanical Reasoning test. For a role that also uses a CAD tool, consider the SolidWorks test. Neither a test score nor an integrity signal should determine the hiring decision alone.
Structured interview questions to explore
Tell me about a time you used a drawing callout to guide work on a part. How did you interpret it, and what did you do next?
Listen for a clear account of reading the callout in context, checking the relevant drawing information and explaining how it informed the candidateâs actions.
Describe a situation where datum references affected how you evaluated or communicated a part requirement.
Listen for a specific explanation of the datum reference frame and how the candidate connected it to the part or inspection task, rather than a memorized definition.
Walk me through how you would investigate a difference between a measured value and a geometric tolerance on a drawing.
Listen for a step-by-step approach that identifies the applicable callout, the tolerance type and its zone, and the information the candidate would check before drawing a conclusion.
When a drawing is unclear to someone working with the part, how would you explain the requirement and check that it is understood?
Listen for precise, job-relevant communication that uses the drawing details, clarifies the intended interpretation and invites the other person to confirm their understanding.
āϏā§āĻā§āϰāĻŋāĻ āĻ āĻŦā§āĻā§āĻāĻŽāĻžāϰā§āĻ āϏāĻŽā§āĻĒāϰā§āĻā§ āĻāĻžāύā§āύ
Who this intermediate test is for
This assessment is intended for intermediate hiring involving mechanical, aerospace, product development and manufacturing engineers; mechanical design and CAD engineers; drafters; quality inspectors; and electrical engineers who work with mechanical drawings. A GD&T skills test can give you a focused view of how candidates in these roles interpret drawing information. It is not a general engineering assessment, and it does not cover every skill needed for any of these jobs. Match it to the responsibilities in your role description and use other job-relevant evidence for the rest. If you are building a broader hiring process, see the pre-employment testing guide and candidate-friendly hiring guide.
What candidates see in the questions
Questions use multiple choice. A candidate reads a short situation, table or statement, then picks the right answer or every right answer. The content includes feature control frames, size limits and measured values. Candidates are asked what a callout means, how datums hold a part, and which geometric tolerance applies and how much of it is available. The test follows ASME Y14.5-2018 terminology and uses generic brackets, plates, shafts and housings. Characteristic names appear in words beside symbols, all sizes are in millimeters, and the arithmetic is simple enough for scratch paper. Those design choices keep questions focused on interpreting the drawing information rather than recognizing a rendered symbol or relying on local practice.
Pair it with role-specific evidence
For a mechanical drawing role, use this assessment to inform a work sample and follow-up conversation about callouts, datum referencing and tolerance zones. It does not replace reviewing a candidateâs relevant work or checking the other requirements of the job. Browse the test library to consider other assessments that match the role. HireValid reports reliability for this test as provisional; reliability is reported once 200 candidates have completed it.
āύā§āϝāĻžāϝā§āϝāϤāĻž āĻ āĻĒā§āϰāϝāĻŧā§āĻāύā§āϝāĻŧ āϏā§āĻŦāĻŋāϧāĻž
Questions use the terms and symbols of ASME Y14.5-2018 only, with every characteristic named in words beside its symbol so no question depends on how a symbol renders. All sizes are in millimeters, the arithmetic is simple enough for scratch paper, and the parts are generic brackets, plates, shafts and housings with no brand, industry jargon or local practice beyond what the standard defines.
āϝā§āĻā§āϤāĻŋāϏāĻā§āĻāϤ āϏā§āĻŦāĻŋāϧāĻž āĻšāĻŋāϏā§āĻŦā§ āĻāĻĒāύāĻŋ āϝā§āĻā§āύ⧠āĻĒā§āϰāĻžāϰā§āĻĨā§āĻā§ āĻ āϤāĻŋāϰāĻŋāĻā§āϤ āϏāĻŽāϝāĻŧ āĻĻāĻŋāϤ⧠āĻĒāĻžāϰā§āύāĨ¤ āĻĢāϞāĻžāĻĢāϞ āĻāĻāĻāύ āĻŦā§āϝāĻā§āϤāĻŋāϰ āĻĒāϰā§āϝāĻžāϞā§āĻāύāĻžāϰ āĻāύā§āϝ āĻĒā§āϰāĻŽāĻžāĻŖ, āĻāĻāύāĻ āϏā§āĻŦāϝāĻŧāĻāĻā§āϰāĻŋāϝāĻŧ āϏāĻŋāĻĻā§āϧāĻžāύā§āϤ āύāϝāĻŧāĨ¤
Provisional: reliability is reported once 200 candidates have completed it.
āĻĒāϰā§āĻā§āώāĻžāϰ āĻŦāĻŋāĻŦāϰāĻŖ
A timed check of how well a candidate reads engineering drawings that use geometric dimensioning and tolerancing as set out in ASME Y14.5-2018. Questions show feature control frames, size limits and measured values, and ask what a callout means, how the datums hold a part, and which tolerance applies and how much of it is available.
- āĻĒā§āϰāĻļā§āύāĻā§āϞāĻŋ āĻāĻāϰā§āĻāĻŋāϤā§āĨ¤
- āϝ⧠āϏāĻšāĻžāϝāĻŧāĻ āĻāĻĒāĻāϰāĻŖ āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰāĻž āϝāĻžāĻŦā§: āĻāϏāĻĄāĻŧāĻž āĻāϰāĻžāϰ āĻāĻžāĻāĻāĨ¤
- āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϰāĻļā§āύ āĻā§āϰāĻŽāĻžāύā§āϏāĻžāϰ⧠āĻāĻāĻŦāĻžāϰ āĻāϰ⧠āĻāϤā§āϤāϰ āĻĻāĻŋāϤ⧠āĻšāϝāĻŧāĨ¤ āĻāĻā§āϰ āĻĒā§āϰāĻļā§āύ⧠āĻĢāĻŋāϰ⧠āϝāĻžāĻāϝāĻŧāĻžāϰ āϏā§āϝā§āĻ āύā§āĻāĨ¤
- āϏāĻŽāϝāĻŧāĻŦāĻĻā§āϧ āĻĒāϰā§āĻā§āώāĻžāϰ āĻāĻā§ 4 āĻŽāĻŋāύāĻŋāĻā§ 4āĻāĻŋ āĻ āύā§āĻļā§āϞāύā§āϰ āĻĒā§āϰāĻļā§āύāĨ¤
ASME Y14.5 āĻāϰ āĻŽāĻžāϞāĻŋāĻā§āϰ āĻā§āϰā§āĻĄāĻŽāĻžāϰā§āĻāĨ¤ HireValid āĻāϰ āϏāĻā§āĻā§ āϝā§āĻā§āϤ āύāϝāĻŧ āĻŦāĻž āĻāϰ āĻĻā§āĻŦāĻžāϰāĻž āϏāĻŽāϰā§āĻĨāĻŋāϤ āύāϝāĻŧāĨ¤
āĻĒā§āϰāĻžāϝāĻŧāĻļāĻ āĻāĻŋāĻā§āĻāĻžāϏāĻŋāϤ āĻĒā§āϰāĻļā§āύ
What does the GD&T test measure?+
It measures how candidates read GD&T callouts, including symbols and modifiers, datum reference frames, and geometric tolerance types and zones. Questions use feature control frames, size limits and measured values. They ask candidates to interpret what a callout means, how datums hold a part, and which tolerance applies and how much of it is available.
How long does the GD&T test take, and can candidates return to an earlier question?+
The assessment has 15 questions and takes 10 minutes. Candidates cannot go back to an earlier question. A separate practice set has four questions and takes four minutes. Scratch paper is allowed. These details can help you decide whether the format fits your hiring process and give candidates clear expectations before they begin.
What roles is this GD&T test designed for?+
It is an intermediate assessment for mechanical, aerospace, product development and manufacturing engineers, plus mechanical design and CAD engineers, drafters, quality inspectors, and electrical engineers who work with mechanical drawings. Choose it when reading GD&T callouts and datum references is relevant to the role, then assess other job requirements separately.
How should I use a GD&T test score in a hiring decision?+
Treat the score as evidence for a person to review, not as a pass mark or a decision on its own. Compare it with a role-relevant work sample and a structured interview. Ask candidates to explain their reasoning about a callout, datum reference or tolerance zone, and consider the full evidence against the job requirements.
Does the GD&T test use drawing-based questions?+
Yes. Multiple-choice questions present a short situation, table or statement. They may include feature control frames, size limits and measured values, asking the candidate to interpret a callout or determine which tolerance applies and how much is available. The content focuses on drawing interpretation, not simply recalling a definition.
How does HireValid handle variation in GD&T test attempts?+
Each candidate gets a different question set drawn from large pools. Question order changes between attempts, and answer options are shuffled. The browser receives one question at a time and answer keys stay on HireValidâs servers. The assessment is timed on the server, and reloading brings back the same question with only the remaining time.
How are the GD&T test questions designed to be clear?+
Questions use ASME Y14.5-2018 terms and symbols, with each characteristic named in words beside its symbol. Sizes are in millimeters, calculations are simple enough for scratch paper, and parts are generic brackets, plates, shafts and housings. The questions do not depend on a symbolâs rendering or local practice beyond what the standard defines.
Is reliability information available for this GD&T test?+
Reliability is currently reported as provisional. It will be reported once 200 candidates have completed the assessment. Until then, review each candidateâs result with other job-related evidence, such as a work sample and a structured interview, rather than treating the score as a standalone hiring decision.
āĻ āϏāĻŽā§āĻĒāϰā§āĻāĻŋāϤ āĻĒāϰā§āĻā§āώāĻž
HVAC (āĻšāĻŋāĻāĻŋāĻ, āĻā§āύā§āĻāĻŋāϞā§āĻļāύ āĻ āĻāϝāĻŧāĻžāϰ āĻāύā§āĻĄāĻŋāĻļāύāĻŋāĻ)
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāύāĻŋāϰā§āĻŽāĻžāĻŖ āĻŦā§āϝāĻŦāϏā§āĻĨāĻžāĻĒāύāĻž
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύCNC āĻŽā§āĻļāĻŋāύ āĻ āĻĒāĻžāϰā§āĻāϰ (āĻāĻŽā§āĻĒā§āϰāĻŋāϝāĻŧāĻžāϞ āĻĒāϰāĻŋāĻŽāĻžāĻĒ)
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāϏāϰāĻā§āĻāĻžāĻŽ āϰāĻā§āώāĻŖāĻžāĻŦā§āĻā§āώāĻŖ
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻŦāĻŋāĻĻā§āϝā§āϤā§āϰ āĻŽā§āϞāĻŋāĻ āĻŦāĻŋāώāϝāĻŧ
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύGHS āύāĻŋāϰāĻžāĻĒāϤā§āϤāĻž
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻĒāϰāĻŦāϰā§āϤ⧠āύāĻŋāϝāĻŧā§āĻā§ āĻā§āϝāĻžāĻŽāĻŋāϤāĻŋāĻ āĻŽāĻžāϤā§āϰāĻž āύāĻŋāϰā§āϧāĻžāϰāĻŖ āĻ āϏāĻšāύāĻļā§āϞāϤāĻž (GD&T) āĻā§āϏā§āĻāĻāĻŋ āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰā§āύ
Free-āϏāĻš āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϞā§āϝāĻžāύā§āĻ āϏāĻŽā§āĻĒā§āϰā§āĻŖ āĻā§āϏā§āĻ āϞāĻžāĻāĻŦā§āϰā§āϰāĻŋ āϰāϝāĻŧā§āĻā§āĨ¤