CNC machinist test for hiring
See how candidates reason through CNC work in inch units before you interview.
- 10 āĻŽāĻŋāύāĻŋāĻ
- 15āĻāĻŋ āĻĒā§āϰāĻļā§āύ
- āĻŽāĻžāĻāĻžāϰāĻŋ
- āĻŦāĻšā§āύāĻŋāϰā§āĻŦāĻžāĻāύā§
- āĻāĻāϰā§āĻāĻŋ āĻāĻžāώāĻžāϝāĻŧ āĻĒā§āϰāĻļā§āύ
- āĻĢā§āύ āĻ āĻĄā§āϏā§āĻāĻāĻĒ
āϏāĻāĻā§āώāĻŋāĻĒā§āϤ āĻāϤā§āϤāϰ
The CNC machinist test is a timed, job-focused assessment for CNC machinists, CNC operators moving into setup or programming, manufacturing and production technicians, and general machinists who work with inch drawings. It measures G-code, machine setup and operation, and machining process planning through multiple-choice questions based on short program listings, setup sheets, offset tables, and part callouts.
āĻāĻāĻŋ āĻā§ āĻĒāϰāĻŋāĻŽāĻžāĻĒ āĻāϰā§
Reading and writing G-code in inch units, setting up and running CNC machines, and planning the order of machining operations.
CNC programming
Candidates read and write G-code in inch units using short program listings.
Machine setup and operation
Candidates work with setup sheets, offset tables, and choices about running or setting up CNC machines.
Process planning
Candidates choose an appropriate order for machining operations based on part callouts and job details.
āĻĒā§āϰāĻļā§āύā§āϰ āϧāϰāύ
āĻŦāĻšā§āύāĻŋāϰā§āĻŦāĻžāĻāύā§
āĻĒā§āϰāĻžāϰā§āĻĨā§: āĻāĻāĻāĻŋ āϏāĻāĻā§āώāĻŋāĻĒā§āϤ āĻĒāϰāĻŋāϏā§āĻĨāĻŋāϤāĻŋ, āϏāĻžāϰāĻŖāĻŋ āĻŦāĻž āĻŦāĻŋāĻŦā§āϤāĻŋ āĻĒāĻĄāĻŧā§ āϏāĻ āĻŋāĻ āĻāϤā§āϤāϰāĻāĻŋ, āĻ āĻĨāĻŦāĻž āϏāĻŦ āϏāĻ āĻŋāĻ āĻāϤā§āϤāϰ āĻŦā§āĻā§ āύā§āϝāĻŧāĨ¤
āĻāĻĒāύāĻŋ āĻĻā§āĻā§āύ: āĻĒā§āϰāĻžāϰā§āĻĨā§ āĻŦāĻŋāώāϝāĻŧāĻāĻŋ āĻļā§āϧ⧠āĻāĻŋāύāϤ⧠āĻĒāĻžāϰā§āύ āĻāĻŋ āύāĻž āύāϝāĻŧ, āĻāĻžāĻā§ āϞāĻžāĻāĻžāύā§āϰ āĻŽāϤ⧠āϝāĻĨā§āώā§āĻ āĻāĻžāϞā§āĻāĻžāĻŦā§ āĻāĻžāύā§āύ āĻāĻŋ āύāĻžāĨ¤
10 āĻŽāĻŋāύāĻŋāĻā§ 15āĻāĻŋ āĻĒā§āϰāĻļā§āύ, āĻāĻāĻŦāĻžāϰ⧠āĻāĻāĻāĻŋ āĻāϰ⧠āĻĻā§āĻāĻžāύ⧠āĻšāϝāĻŧāĨ¤
āĻāĻ āĻĒāϰā§āĻā§āώāĻžāϰ āĻāĻĒāϝā§āĻā§ āĻĒāĻĻ
CNC machinists, CNC operators moving into setup or programming, manufacturing and production technicians, and general machinists who work with inch drawings.
Useful evidence for CNC hiring
Look beyond job titles
See how candidates handle inch-unit G-code, setup information, and machining decisions, rather than relying on resume descriptions alone.
Focus interviews on the work
Separate scores for CNC programming, machine setup and operation, and process planning show which area to probe with machinists and operators moving into setup.
Test with shop documents
Questions use program listings, setup sheets, offset tables, and part callouts, so the score reflects decisions a machinist makes on the job.
Keep the first check brief
The assessment takes 10 minutes and has 15 questions. An on-screen calculator is available for speeds, feeds, and tolerances.
āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϰāĻžāϰā§āĻĨā§āϰ āĻāύā§āϝ āĻāĻĒāύāĻŋ āϝāĻž āĻĒāĻžāĻŦā§āύ
- āĻĒā§āϰ⧠āϏāĻŽāϝāĻŧ āĻĒāϰā§āĻā§āώāĻžāϰ āĻā§āϝāĻžāĻŦā§āĻ āĻāĻŋāϞā§āύ
- āĻāĻĒāĻŋ-āĻĒā§āϏā§āĻ āĻāϰāĻž āĻāϤā§āϤāϰ āύā§āĻ
- āĻāĻāĻāĻžāύāĻž āĻāϤāĻŋāϤ⧠āĻāϤā§āϤāϰ āĻĻāĻŋāϝāĻŧā§āĻā§āύ
āϏā§āĻā§āϰ, āĻĒā§āϰā§āĻĢāĻžāĻāϞ āĻ āϏāϤāϤāĻžāϰ āϏāĻāĻā§āϤāĻā§āϞāĻŋ āϏāĻžāĻā§āώāĻžā§āĻāĻžāϰā§āϰ āĻĒāĻžāĻļāĻžāĻĒāĻžāĻļāĻŋ āĻāĻĒāύāĻžāϰ āĻĒāϰā§āϝāĻžāϞā§āĻāύāĻžāϰ āĻāύā§āϝ āĻĒā§āϰāĻŽāĻžāĻŖ, āĻāĻāύāĻ āϏā§āĻŦāϝāĻŧāĻāĻā§āϰāĻŋāϝāĻŧ āϏāĻŋāĻĻā§āϧāĻžāύā§āϤā§āϰ āĻāĻŋāϤā§āϤāĻŋ āύāϝāĻŧāĨ¤
āĻāĻ āĻā§āϏā§āĻāĻāĻŋ āĻŦāĻŋāύāĻžāĻŽā§āϞā§āϝ⧠āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰā§āύ
Test controls and integrity signals
Each candidate gets a different set of questions from large question pools. Question order and answer options are shuffled, and the browser receives one question at a time. Timing runs on the server. Reloading brings back the same question with only the time left. The test takes 10 minutes, and candidates cannot go back to earlier questions. Question text cannot be copied or selected; blocked copy attempts are recorded in the timeline. HireValid records signals such as time away from the test tab, pastes into answers, and answers faster than a question can be read. The employer reviews them in an Integrity Score and evidence timeline, which never decide on their own. With candidate consent, webcam photos can be added at random moments.
āĻāĻŽāϰāĻž āϝā§āĻāĻžāĻŦā§ AI āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰ⧠āĻĒā§āϰāϤāĻžāϰāĻŖāĻž āĻ ā§āĻāĻžāĻ Âˇ āĻ āĻāĻŖā§āĻĄāϤāĻž-āϏāĻāĻā§āϰāĻžāύā§āϤ āϏāĻāĻā§āϤ
Use the score as evidence
Review the score alongside a work sample and a structured interview. Ask candidates to explain how they would approach an inch-unit setup or sequence machining operations, then compare that reasoning with their sub-skill scores. The score is one signal for your review, not a hiring decision. For adjacent skills, see Geometric Dimensioning & Tolerancing (GD&T), Mechanical Reasoning, and HVAC (Heating, Ventilation, and Air Conditioning).
Structured interview questions
Tell me how you would decide the order of operations for a part shown on an inch drawing.
Listen for a clear sequence and how the candidate uses the part callouts to guide the plan.
Describe how you would check a setup sheet and offset table before running a CNC job.
Listen for a deliberate review of setup information and how the candidate would resolve uncertainty before operation.
Walk me through how you would respond if a program listing did not match the part callouts.
Listen for careful comparison of the information and a reasoned next step, rather than an unsupported guess.
āϏā§āĻā§āϰāĻŋāĻ āĻ āĻŦā§āĻā§āĻāĻŽāĻžāϰā§āĻ āϏāĻŽā§āĻĒāϰā§āĻā§ āĻāĻžāύā§āύ
āύā§āϝāĻžāϝā§āϝāϤāĻž āĻ āĻĒā§āϰāϝāĻŧā§āĻāύā§āϝāĻŧ āϏā§āĻŦāĻŋāϧāĻž
Questions use the inch units, G and M codes and shop terms the job itself requires, written in plain US English without idioms or local references. Any chart a question depends on, such as tap drill sizes or surface speeds, is shown in the question, so nothing rests on memorizing one shop's tables. Code is written in the common ISO style most controls share, avoiding features that work differently from one control maker to another. Names in setup notes come from many backgrounds, and every candidate may use the on-screen calculator and scratch paper.
āϝā§āĻā§āϤāĻŋāϏāĻā§āĻāϤ āϏā§āĻŦāĻŋāϧāĻž āĻšāĻŋāϏā§āĻŦā§ āĻāĻĒāύāĻŋ āϝā§āĻā§āύ⧠āĻĒā§āϰāĻžāϰā§āĻĨā§āĻā§ āĻ āϤāĻŋāϰāĻŋāĻā§āϤ āϏāĻŽāϝāĻŧ āĻĻāĻŋāϤ⧠āĻĒāĻžāϰā§āύāĨ¤ āĻĢāϞāĻžāĻĢāϞ āĻāĻāĻāύ āĻŦā§āϝāĻā§āϤāĻŋāϰ āĻĒāϰā§āϝāĻžāϞā§āĻāύāĻžāϰ āĻāύā§āϝ āĻĒā§āϰāĻŽāĻžāĻŖ, āĻāĻāύāĻ āϏā§āĻŦāϝāĻŧāĻāĻā§āϰāĻŋāϝāĻŧ āϏāĻŋāĻĻā§āϧāĻžāύā§āϤ āύāϝāĻŧāĨ¤
Provisional: reliability is reported once 200 candidates have completed it.
āĻĒāϰā§āĻā§āώāĻžāϰ āĻŦāĻŋāĻŦāϰāĻŖ
A timed, job-focused check for people who run and program CNC mills and lathes in inch units. Candidates read short program listings, setup sheets, offset tables and part callouts, and choose what a skilled machinist would write, set or do next. Each question has its own short timer, and an on-screen calculator is available for speeds, feeds and tolerances.
- āĻĒā§āϰāĻļā§āύāĻā§āϞāĻŋ āĻāĻāϰā§āĻāĻŋāϤā§āĨ¤
- āϝ⧠āϏāĻšāĻžāϝāĻŧāĻ āĻāĻĒāĻāϰāĻŖ āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰāĻž āϝāĻžāĻŦā§: āĻāĻāĻāĻŋ āĻā§āϝāĻžāϞāĻā§āϞā§āĻāϰ, āĻāϏāĻĄāĻŧāĻž āĻāϰāĻžāϰ āĻāĻžāĻāĻāĨ¤
- āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϰāĻļā§āύ āĻā§āϰāĻŽāĻžāύā§āϏāĻžāϰ⧠āĻāĻāĻŦāĻžāϰ āĻāϰ⧠āĻāϤā§āϤāϰ āĻĻāĻŋāϤ⧠āĻšāϝāĻŧāĨ¤ āĻāĻā§āϰ āĻĒā§āϰāĻļā§āύ⧠āĻĢāĻŋāϰ⧠āϝāĻžāĻāϝāĻŧāĻžāϰ āϏā§āϝā§āĻ āύā§āĻāĨ¤
- āϏāĻŽāϝāĻŧāĻŦāĻĻā§āϧ āĻĒāϰā§āĻā§āώāĻžāϰ āĻāĻā§ 4 āĻŽāĻŋāύāĻŋāĻā§ 4āĻāĻŋ āĻ āύā§āĻļā§āϞāύā§āϰ āĻĒā§āϰāĻļā§āύāĨ¤
āĻĒā§āϰāĻžāϝāĻŧāĻļāĻ āĻāĻŋāĻā§āĻāĻžāϏāĻŋāϤ āĻĒā§āϰāĻļā§āύ
What does the CNC machinist test measure?+
It measures reading and writing G-code in inch units, setting up and running CNC machines, and planning the order of machining operations. Candidates respond to short program listings, setup sheets, offset tables, and part callouts.
How long is the CNC machinist test, and what can candidates use?+
The test has 15 multiple-choice questions and takes 10 minutes. Each question has its own short timer, and an on-screen calculator is available for speeds, feeds, and tolerances. Candidates may also use scratch paper.
Is there a practice set for the CNC machinist test?+
Yes. The practice set has 4 questions and takes 4 minutes. It can introduce candidates to the assessment experience before they work through questions on inch-unit G-code, machine setup, and operation planning.
How are CNC machinist test questions written?+
Questions use inch units, G and M codes, and shop terms in plain US English. Any chart needed, such as tap drill sizes or surface speeds, appears in the question. Code uses common ISO style and avoids features that vary by control maker.
āĻ āϏāĻŽā§āĻĒāϰā§āĻāĻŋāϤ āĻĒāϰā§āĻā§āώāĻž
āύāĻŋāϰā§āĻŽāĻžāĻŖ āĻŦā§āϝāĻŦāϏā§āĻĨāĻžāĻĒāύāĻž
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύHVAC (āĻšāĻŋāĻāĻŋāĻ, āĻā§āύā§āĻāĻŋāϞā§āĻļāύ āĻ āĻāϝāĻŧāĻžāϰ āĻāύā§āĻĄāĻŋāĻļāύāĻŋāĻ)
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻā§āϝāĻžāĻŽāĻŋāϤāĻŋāĻ āĻŽāĻžāϤā§āϰāĻž āύāĻŋāϰā§āϧāĻžāϰāĻŖ āĻ āϏāĻšāύāĻļā§āϞāϤāĻž (GD&T)
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāϏāϰāĻā§āĻāĻžāĻŽ āϰāĻā§āώāĻŖāĻžāĻŦā§āĻā§āώāĻŖ
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻŦāĻŋāĻĻā§āϝā§āϤā§āϰ āĻŽā§āϞāĻŋāĻ āĻŦāĻŋāώāϝāĻŧ
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύGHS āύāĻŋāϰāĻžāĻĒāϤā§āϤāĻž
10 āĻŽāĻŋāύāĻŋāĻ, āĻā§āĻŽāĻŋāĻāĻž-āύāĻŋāϰā§āĻĻāĻŋāώā§āĻ āĻĻāĻā§āώāϤāĻž
āĻĻā§āĻā§ āύāĻŋāύāĻĒāϰāĻŦāϰā§āϤ⧠āύāĻŋāϝāĻŧā§āĻā§ CNC āĻŽā§āĻļāĻŋāύ āĻ āĻĒāĻžāϰā§āĻāϰ (āĻāĻŽā§āĻĒā§āϰāĻŋāϝāĻŧāĻžāϞ āĻĒāϰāĻŋāĻŽāĻžāĻĒ) āĻā§āϏā§āĻāĻāĻŋ āĻŦā§āϝāĻŦāĻšāĻžāϰ āĻāϰā§āύ
Free-āϏāĻš āĻĒā§āϰāϤāĻŋāĻāĻŋ āĻĒā§āϞā§āϝāĻžāύā§āĻ āϏāĻŽā§āĻĒā§āϰā§āĻŖ āĻā§āϏā§āĻ āϞāĻžāĻāĻŦā§āϰā§āϰāĻŋ āϰāϝāĻŧā§āĻā§āĨ¤