เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

GD&T drawing skills test for hiring

See how candidates interpret GD&T symbols, datums and tolerance zones in short drawing-based situations.

  • 10 เชฎเชฟเชจเชฟเชŸ
  • 15 เชชเซเชฐเชถเซเชจเซ‹
  • เชฎเชงเซเชฏเชฎ
  • เชฌเชนเซเชตเชฟเช•เชฒเซเชชเซ€
  • เช…เช‚เช—เซเชฐเซ‡เชœเซ€เชฎเชพเช‚ เชชเซเชฐเชถเซเชจเซ‹
  • เชซเซ‹เชจ เช…เชจเซ‡ เชกเซ‡เชธเซเช•เชŸเซ‹เชช

เชŸเซ‚เช‚เช•เซ‹ เชœเชตเชพเชฌ

The GD&T test is a timed, intermediate hiring assessment for engineers, drafters and quality inspectors who work with mechanical drawings. It measures how candidates read symbols and modifiers, datum reference frames, and geometric tolerance types and zones. Multiple-choice questions use feature control frames, size limits and measured values to check applied drawing interpretation.

เชคเซ‡ เชถเซเช‚ เชฎเชพเชชเซ‡ เช›เซ‡

Reading GD&T callouts: symbols and modifiers, datum reference frames, and the kinds of geometric tolerance and their zones.

Fundamentals and symbols

Questions check how candidates interpret GD&T symbols and modifiers in callouts, including what a feature control frame means.

Datum referencing

Candidates consider how datum references establish a frame for holding and interpreting a part.

Geometric tolerance types

Questions distinguish geometric tolerance types and their zones, including which tolerance applies and how much is available.

เชชเซเชฐเชถเซเชจเซ‹เชจเชพ เชชเซเชฐเช•เชพเชฐเซ‹

เชฌเชนเซเชตเชฟเช•เชฒเซเชชเซ€

เช‰เชฎเซ‡เชฆเชตเชพเชฐ: เชŸเซ‚เช‚เช•เซ€ เชชเชฐเชฟเชธเซเชฅเชฟเชคเชฟ, เช•เซ‹เชทเซเชŸเช• เช…เชฅเชตเชพ เชตเชฟเชงเชพเชจ เชตเชพเช‚เชšเซ€เชจเซ‡ เชธเชพเชšเซ‹ เชœเชตเชพเชฌ เช…เชฅเชตเชพ เชฌเชงเชพ เชธเชพเชšเชพ เชœเชตเชพเชฌเซ‹ เชชเชธเช‚เชฆ เช•เชฐเซ‡ เช›เซ‡.

เชคเชฎเชจเซ‡ เชฆเซ‡เช–เชพเชฏ เช›เซ‡: เช‰เชฎเซ‡เชฆเชตเชพเชฐ เชธเชพเชฎเช—เซเชฐเซ€เชจเซ‡ เชฎเชพเชคเซเชฐ เช“เชณเช–เซ‡ เช›เซ‡ เช•เซ‡ เชคเซ‡เชจเซ‹ เช‰เชชเชฏเซ‹เช— เช•เชฐเซ€ เชถเช•เซ‡ เชเชŸเชฒเซ€ เชธเชพเชฐเซ€ เชฐเซ€เชคเซ‡ เชœเชพเชฃเซ‡ เช›เซ‡.

10 เชฎเชฟเชจเชฟเชŸเชฎเชพเช‚ 15 เชชเซเชฐเชถเซเชจเซ‹, เชเช• เชธเชฎเชฏเซ‡ เชเช• เชชเซเชฐเชถเซเชจ เช†เชชเชตเชพเชฎเชพเช‚ เช†เชตเซ‡ เช›เซ‡.

เช† test เชฎเชพเชŸเซ‡ เชฏเซ‹เช—เซเชฏ เชญเซ‚เชฎเชฟเช•เชพเช“

Mechanical, aerospace, product development and manufacturing engineers, mechanical design and CAD engineers, drafters, quality inspectors, and electrical engineers who work with mechanical drawings.

A focused check of drawing interpretation

  1. See application, not just familiarity

    A resume can list drawing experience, but it does not show how a candidate reads a feature control frame in context. This assessment asks candidates to interpret short situations, tables or statements and choose the right answer, or every right answer.

  2. Check the details that matter in a drawing

    The questions cover symbols and modifiers, datum reference frames, geometric tolerance types and tolerance zones. Candidates also work with feature control frames, size limits and measured values to explain what a callout means and how much tolerance is available.

  3. Give the interview a specific starting point

    Use the result to decide which drawing topics to explore further in a work sample or structured interview. It can help focus follow-up on a candidateโ€™s interpretation of datums or tolerance zones, rather than relying only on a general account of experience.

  4. Keep the assessment compact

    The test has 15 questions and takes 10 minutes. A four-question practice set takes four minutes. That gives hiring teams a defined, short assessment to consider alongside other evidence, not a replacement for reviewing relevant work.

เชฆเชฐเซ‡เช• เช‰เชฎเซ‡เชฆเชตเชพเชฐ เชฎเชพเชŸเซ‡ เชคเชฎเชจเซ‡ เชถเซเช‚ เชฎเชณเซ‡ เช›เซ‡

เชจเชฎเซ‚เชจเชพเชจเซ‹ เชฐเชฟเชชเซ‹เชฐเซเชŸ (เช•เชพเชฒเซเชชเชจเชฟเช• เชกเซ‡เชŸเชพ)เชญเซŒเชฎเชฟเชคเชฟเช• เชชเชฐเชฟเชฎเชพเชฃ เชจเชฟเชฐเซเชงเชพเชฐเชฃ เช…เชจเซ‡ เชธเชนเชฟเชทเซเชฃเซเชคเชพ (GD&T)
67%เชชเชฐเซเชธเซ‡เชจเซเชŸเชพเช‡เชฒ 37. เชฌเซ‡เชจเซเชšเชฎเชพเชฐเซเช•: HireValid เช‰เชฎเซ‡เชฆเชตเชพเชฐเซ‹, n = 2,117
Fundamentals and symbols61%
Datum referencing66%
Geometric tolerance types75%
Integrity Scoreเช‰เชšเซเชš เชตเชฟเชถเซเชตเชพเชธ
  • เชธเชฎเช—เซเชฐ เชธเชฎเชฏ เชฆเชฐเชฎเชฟเชฏเชพเชจ เชŸเซ‡เชธเซเชŸ เชŸเซ…เชฌ เชชเชฐ เชœ เชฐเชนเซเชฏเชพ
  • เชชเซ‡เชธเซเชŸ เช•เชฐเซ‡เชฒเชพ เชœเชตเชพเชฌเซ‹ เชจเชฅเซ€
  • เชธเซเชฅเชฟเชฐ เช—เชคเชฟเช เชœเชตเชพเชฌ เช†เชชเซเชฏเชพ

เชธเซเช•เซ‹เชฐ, เชชเซเชฐเซ‹เชซเชพเช‡เชฒ เช…เชจเซ‡ เช…เช–เช‚เชกเชฟเชคเชคเชพเชจเชพ เชธเช‚เช•เซ‡เชคเซ‹ เช‡เชจเซเชŸเชฐเชตเซเชฏเซ‚ เชธเชพเชฅเซ‡ เชธเชฎเซ€เช•เซเชทเชพ เช•เชฐเชตเชพ เชฎเชพเชŸเซ‡เชจเชพ เชชเซเชฐเชพเชตเชพ เช›เซ‡, เช•เซเชฏเชพเชฐเซ‡เชฏ เชธเซเชตเชšเชพเชฒเชฟเชค เชจเชฟเชฐเซเชฃเชฏ เชจเชฅเซ€.

เช† เชŸเซ‡เชธเซเชŸ เชฎเชซเชคเชฎเชพเช‚ เช…เชœเชฎเชพเชตเซ‹

An assessment with integrity signals for review

Each candidate receives a different set of questions drawn from large question pools. Questions appear in a different order for each attempt, and answer options are shuffled. The browser receives one question at a time, and answer keys stay on HireValidโ€™s servers. The GD&T test is timed on the server; reloading returns the same question with only the remaining time, and candidates cannot go back to earlier questions. Question text cannot be copied or selected, and a blocked copy attempt is recorded in the timeline. Each invitation link is personal and expires, and a finished test cannot be taken again. HireValid can summarize signals such as time away from the test tab, pastes into answers and answers faster than a question can be read in an Integrity Score with an evidence timeline. The employer reviews those signals; the system does not decide on its own. With candidate consent, an employer can add webcam photos at random moments.

Treat the score as evidence to review

Use the score as one input, not as a pass mark or a decision by itself. Review it alongside a relevant work sample and a structured interview. For example, ask the candidate to interpret a generic drawing or callout relevant to the role, then invite them to explain how they reached their conclusion. Compare that explanation with the assessment areas: symbols and modifiers, datum references, or tolerance types and zones. Look for clear reasoning and a sound connection between the drawing information and the answer, while making room to check any area the test does not cover. Keep the same job-related prompts and evaluation approach for candidates applying to the same role. For a broader engineering context, you could pair the result with the Mechanical Reasoning test. For a role that also uses a CAD tool, consider the SolidWorks test. Neither a test score nor an integrity signal should determine the hiring decision alone.

Structured interview questions to explore

  1. Tell me about a time you used a drawing callout to guide work on a part. How did you interpret it, and what did you do next?

    Listen for a clear account of reading the callout in context, checking the relevant drawing information and explaining how it informed the candidateโ€™s actions.

  2. Describe a situation where datum references affected how you evaluated or communicated a part requirement.

    Listen for a specific explanation of the datum reference frame and how the candidate connected it to the part or inspection task, rather than a memorized definition.

  3. Walk me through how you would investigate a difference between a measured value and a geometric tolerance on a drawing.

    Listen for a step-by-step approach that identifies the applicable callout, the tolerance type and its zone, and the information the candidate would check before drawing a conclusion.

  4. When a drawing is unclear to someone working with the part, how would you explain the requirement and check that it is understood?

    Listen for precise, job-relevant communication that uses the drawing details, clarifies the intended interpretation and invites the other person to confirm their understanding.

Who this intermediate test is for

This assessment is intended for intermediate hiring involving mechanical, aerospace, product development and manufacturing engineers; mechanical design and CAD engineers; drafters; quality inspectors; and electrical engineers who work with mechanical drawings. A GD&T skills test can give you a focused view of how candidates in these roles interpret drawing information. It is not a general engineering assessment, and it does not cover every skill needed for any of these jobs. Match it to the responsibilities in your role description and use other job-relevant evidence for the rest. If you are building a broader hiring process, see the pre-employment testing guide and candidate-friendly hiring guide.

What candidates see in the questions

Questions use multiple choice. A candidate reads a short situation, table or statement, then picks the right answer or every right answer. The content includes feature control frames, size limits and measured values. Candidates are asked what a callout means, how datums hold a part, and which geometric tolerance applies and how much of it is available. The test follows ASME Y14.5-2018 terminology and uses generic brackets, plates, shafts and housings. Characteristic names appear in words beside symbols, all sizes are in millimeters, and the arithmetic is simple enough for scratch paper. Those design choices keep questions focused on interpreting the drawing information rather than recognizing a rendered symbol or relying on local practice.

Pair it with role-specific evidence

For a mechanical drawing role, use this assessment to inform a work sample and follow-up conversation about callouts, datum referencing and tolerance zones. It does not replace reviewing a candidateโ€™s relevant work or checking the other requirements of the job. Browse the test library to consider other assessments that match the role. HireValid reports reliability for this test as provisional; reliability is reported once 200 candidates have completed it.

เชจเซเชฏเชพเชฏเชธเช‚เช—เชคเชคเชพ เช…เชจเซ‡ เชœเชฐเซ‚เชฐเซ€ เชธเซเชตเชฟเชงเชพเช“

Questions use the terms and symbols of ASME Y14.5-2018 only, with every characteristic named in words beside its symbol so no question depends on how a symbol renders. All sizes are in millimeters, the arithmetic is simple enough for scratch paper, and the parts are generic brackets, plates, shafts and housings with no brand, industry jargon or local practice beyond what the standard defines.

เชธเซเชตเชฟเชงเชพ เชคเชฐเซ€เช•เซ‡ เชคเชฎเซ‡ เช•เซ‹เชˆเชชเชฃ เช‰เชฎเซ‡เชฆเชตเชพเชฐเชจเซ‡ เชตเชงเชพเชฐเชพเชจเซ‹ เชธเชฎเชฏ เช†เชชเซ€ เชถเช•เซ‹ เช›เซ‹. เชชเชฐเชฟเชฃเชพเชฎเซ‹ เชตเซเชฏเช•เซเชคเชฟ เชฆเซเชตเชพเชฐเชพ เชธเชฎเซ€เช•เซเชทเชพ เช•เชฐเชตเชพ เชฎเชพเชŸเซ‡เชจเชพ เชชเซเชฐเชพเชตเชพ เช›เซ‡, เช•เซเชฏเชพเชฐเซ‡เชฏ เช†เชชเชฎเซ‡เชณเซ‡ เชฒเซ‡เชตเชพเชคเซ‹ เชจเชฟเชฐเซเชฃเชฏ เชจเชนเซ€เช‚.

Provisional: reliability is reported once 200 candidates have completed it.

เชจเชฟเชทเซเชชเช•เซเชทเชคเชพ เช…เช‚เช—เซ‡เชจเซ‹ เช…เชฎเชพเชฐเซ‹ เช…เชญเชฟเช—เชฎ เชตเชพเช‚เชšเซ‹

เชŸเซ‡เชธเซเชŸเชจเซ€ เชตเชฟเช—เชคเซ‹

A timed check of how well a candidate reads engineering drawings that use geometric dimensioning and tolerancing as set out in ASME Y14.5-2018. Questions show feature control frames, size limits and measured values, and ask what a callout means, how the datums hold a part, and which tolerance applies and how much of it is available.

  • เชชเซเชฐเชถเซเชจเซ‹ เช…เช‚เช—เซเชฐเซ‡เชœเซ€เชฎเชพเช‚ เช›เซ‡.
  • เชฎเช‚เชœเซ‚เชฐ เชธเชนเชพเชฏ: เชฐเชซ เช•เชพเชฎ เชฎเชพเชŸเซ‡เชจเซเช‚ เช•เชพเช—เชณ.
  • เชฆเชฐเซ‡เช• เชชเซเชฐเชถเซเชจเชจเซ‹ เชœเชตเชพเชฌ เช•เซเชฐเชฎ เชชเซเชฐเชฎเชพเชฃเซ‡ เชเช• เชœ เชตเชพเชฐ เช†เชชเซ€ เชถเช•เชพเชฏ เช›เซ‡; เชชเชพเช›เชพ เชœเชˆ เชถเช•เชพเชคเซเช‚ เชจเชฅเซ€.
  • เชธเชฎเชฏเชฎเชฐเซเชฏเชพเชฆเชพเชตเชพเชณเชพ test เชชเชนเซ‡เชฒเชพเช‚ 4 เชชเซเชฐเซ‡เช•เซเชŸเชฟเชธ เชชเซเชฐเชถเซเชจเซ‹, 4 เชฎเชฟเชจเชฟเชŸ.

ASME Y14.5 เชคเซ‡เชจเชพ เชฎเชพเชฒเชฟเช•เชจเซ‹ เชŸเซเชฐเซ‡เชกเชฎเชพเชฐเซเช• เช›เซ‡. HireValid เชคเซ‡เชจเซ€ เชธเชพเชฅเซ‡ เชธเช‚เช•เชณเชพเชฏเซ‡เชฒเซเช‚ เชจเชฅเซ€ เช•เซ‡ เชคเซ‡เชจเชพ เชฆเซเชตเชพเชฐเชพ เชธเชฎเชฐเซเชฅเชฟเชค เชจเชฅเซ€.

เชตเชพเชฐเช‚เชตเชพเชฐ เชชเซ‚เช›เชพเชคเชพ เชชเซเชฐเชถเซเชจเซ‹

What does the GD&T test measure?+

It measures how candidates read GD&T callouts, including symbols and modifiers, datum reference frames, and geometric tolerance types and zones. Questions use feature control frames, size limits and measured values. They ask candidates to interpret what a callout means, how datums hold a part, and which tolerance applies and how much of it is available.

How long does the GD&T test take, and can candidates return to an earlier question?+

The assessment has 15 questions and takes 10 minutes. Candidates cannot go back to an earlier question. A separate practice set has four questions and takes four minutes. Scratch paper is allowed. These details can help you decide whether the format fits your hiring process and give candidates clear expectations before they begin.

What roles is this GD&T test designed for?+

It is an intermediate assessment for mechanical, aerospace, product development and manufacturing engineers, plus mechanical design and CAD engineers, drafters, quality inspectors, and electrical engineers who work with mechanical drawings. Choose it when reading GD&T callouts and datum references is relevant to the role, then assess other job requirements separately.

How should I use a GD&T test score in a hiring decision?+

Treat the score as evidence for a person to review, not as a pass mark or a decision on its own. Compare it with a role-relevant work sample and a structured interview. Ask candidates to explain their reasoning about a callout, datum reference or tolerance zone, and consider the full evidence against the job requirements.

Does the GD&T test use drawing-based questions?+

Yes. Multiple-choice questions present a short situation, table or statement. They may include feature control frames, size limits and measured values, asking the candidate to interpret a callout or determine which tolerance applies and how much is available. The content focuses on drawing interpretation, not simply recalling a definition.

How does HireValid handle variation in GD&T test attempts?+

Each candidate gets a different question set drawn from large pools. Question order changes between attempts, and answer options are shuffled. The browser receives one question at a time and answer keys stay on HireValidโ€™s servers. The assessment is timed on the server, and reloading brings back the same question with only the remaining time.

How are the GD&T test questions designed to be clear?+

Questions use ASME Y14.5-2018 terms and symbols, with each characteristic named in words beside its symbol. Sizes are in millimeters, calculations are simple enough for scratch paper, and parts are generic brackets, plates, shafts and housings. The questions do not depend on a symbolโ€™s rendering or local practice beyond what the standard defines.

Is reliability information available for this GD&T test?+

Reliability is currently reported as provisional. It will be reported once 200 candidates have completed the assessment. Until then, review each candidateโ€™s result with other job-related evidence, such as a work sample and a structured interview, rather than treating the score as a standalone hiring decision.

เชธเช‚เชฌเช‚เชงเชฟเชค เช•เชธเซ‹เชŸเซ€เช“

เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

HVAC (เชนเซ€เชŸเชฟเช‚เช—, เชตเซ‡เชจเซเชŸเชฟเชฒเซ‡เชถเชจ เช…เชจเซ‡ เชเชฐ เช•เชจเซเชกเชฟเชถเชจเชฟเช‚เช—)

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชฌเชพเช‚เชงเช•เชพเชฎ เชตเซเชฏเชตเชธเซเชฅเชพเชชเชจ

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

CNC เชฎเชถเซ€เชจเชฟเชธเซเชŸ (เช‡เชฎเซเชชเชฟเชฐเชฟเชฏเชฒ เชฎเชพเชช เชชเชฆเซเชงเชคเชฟ)

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เช‰เชชเช•เชฐเชฃเซ‹เชจเซ€ เชœเชพเชณเชตเชฃเซ€

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชตเซ€เชœเชณเซ€เชจเชพ เชฎเซ‚เชณเชญเซ‚เชค เชธเชฟเชฆเซเชงเชพเช‚เชคเซ‹

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

GHS เชธเชฒเชพเชฎเชคเซ€

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“

เชคเชฎเชพเชฐเซ€ เช†เช—เชพเชฎเซ€ เชญเชฐเชคเซ€เชฎเชพเช‚ เชญเซŒเชฎเชฟเชคเชฟเช• เชชเชฐเชฟเชฎเชพเชฃ เชจเชฟเชฐเซเชงเชพเชฐเชฃ เช…เชจเซ‡ เชธเชนเชฟเชทเซเชฃเซเชคเชพ (GD&T) เชŸเซ‡เชธเซเชŸเชจเซ‹ เช‰เชชเชฏเซ‹เช— เช•เชฐเซ‹

เชฆเชฐเซ‡เช• เชชเซเชฒเชพเชจเชฎเชพเช‚, Free เชธเชนเชฟเชค, เชŸเซ‡เชธเซเชŸเชจเซ€ เชธเช‚เชชเซ‚เชฐเซเชฃ เชฒเชพเช‡เชฌเซเชฐเซ‡เชฐเซ€ เชธเชพเชฎเซ‡เชฒ เช›เซ‡.

เช† เชŸเซ‡เชธเซเชŸ เชฎเชซเชคเชฎเชพเช‚ เช…เชœเชฎเชพเชตเซ‹Free เชชเซเชฒเชพเชจ. เช•เซเชฐเซ‡เชกเชฟเชŸ เช•เชพเชฐเซเชกเชจเซ€ เชœเชฐเซ‚เชฐ เชจเชฅเซ€.
Free เชชเซเชฒเชพเชจ. เช•เซเชฐเซ‡เชกเชฟเชŸ เช•เชพเชฐเซเชกเชจเซ€ เชœเชฐเซ‚เชฐ เชจเชฅเซ€.เช† เชŸเซ‡เชธเซเชŸ เชฎเชซเชคเชฎเชพเช‚ เช…เชœเชฎเชพเชตเซ‹

เชธเช‚เชชเชพเชฆเช•เซ€เชฏ เชŸเซ€เชฎ เชตเชฟเชถเซ‡

HireValidเชจเซ€ เชธเช‚เชชเชพเชฆเช•เซ€เชฏ เชŸเซ€เชฎ เชฆเซเชตเชพเชฐเชพ เชฒเช–เชพเชฏเซ‡เชฒเซเช‚ เช…เชจเซ‡ เชคเชฅเซเชฏเซ‹เชจเซ€ เชšเช•เชพเชธเชฃเซ€ เช•เชฐเซ‡เชฒเซเช‚. เชคเชชเชพเชธเซ‡เชฒเชพ เชธเซเชฐเซ‹เชคเซ‹ . เชธเช‚เชชเชพเชฆเช•เซ€เชฏ เชจเซ€เชคเชฟ เชตเชพเช‚เชšเซ‹.