เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

HVAC test for hiring

Check practical HVAC judgment through short equipment scenarios, readings, and symptoms.

  • 10 เชฎเชฟเชจเชฟเชŸ
  • 15 เชชเซเชฐเชถเซเชจเซ‹
  • เชฎเชงเซเชฏเชฎ
  • เชฌเชนเซเชตเชฟเช•เชฒเซเชชเซ€
  • เช…เช‚เช—เซเชฐเซ‡เชœเซ€เชฎเชพเช‚ เชชเซเชฐเชถเซเชจเซ‹
  • เชซเซ‹เชจ เช…เชจเซ‡ เชกเซ‡เชธเซเช•เชŸเซ‹เชช

เชŸเซ‚เช‚เช•เซ‹ เชœเชตเชพเชฌ

The HVAC test is a 10-minute, 15-question hiring assessment of practical knowledge for diagnosing faults and maintaining chillers, water loops, air distribution, air conditioners, and dehumidifiers. It is designed for HVAC service and maintenance technicians, facilities technicians, chiller and plant operators, and apprentices nearing the end of training.

เชคเซ‡ เชถเซเช‚ เชฎเชพเชชเซ‡ เช›เซ‡

Practical knowledge for keeping chillers, water loops, air distribution, air conditioners and dehumidifiers running, and diagnosing their faults from readings.

Chillers and water distribution

Covers practical knowledge of chillers, pumps, and water loops, including diagnosing faults from readings.

Air distribution and ventilation

Covers air handlers and ventilation situations, with attention to readings, symptoms, and maintenance steps.

Air conditioners and dehumidifiers

Covers diagnosing problems and choosing appropriate checks or maintenance steps for cooling and dehumidification equipment.

เชชเซเชฐเชถเซเชจเซ‹เชจเชพ เชชเซเชฐเช•เชพเชฐเซ‹

เชฌเชนเซเชตเชฟเช•เชฒเซเชชเซ€

เช‰เชฎเซ‡เชฆเชตเชพเชฐ: เชŸเซ‚เช‚เช•เซ€ เชชเชฐเชฟเชธเซเชฅเชฟเชคเชฟ, เช•เซ‹เชทเซเชŸเช• เช…เชฅเชตเชพ เชตเชฟเชงเชพเชจ เชตเชพเช‚เชšเซ€เชจเซ‡ เชธเชพเชšเซ‹ เชœเชตเชพเชฌ เช…เชฅเชตเชพ เชฌเชงเชพ เชธเชพเชšเชพ เชœเชตเชพเชฌเซ‹ เชชเชธเช‚เชฆ เช•เชฐเซ‡ เช›เซ‡.

เชคเชฎเชจเซ‡ เชฆเซ‡เช–เชพเชฏ เช›เซ‡: เช‰เชฎเซ‡เชฆเชตเชพเชฐ เชธเชพเชฎเช—เซเชฐเซ€เชจเซ‡ เชฎเชพเชคเซเชฐ เช“เชณเช–เซ‡ เช›เซ‡ เช•เซ‡ เชคเซ‡เชจเซ‹ เช‰เชชเชฏเซ‹เช— เช•เชฐเซ€ เชถเช•เซ‡ เชเชŸเชฒเซ€ เชธเชพเชฐเซ€ เชฐเซ€เชคเซ‡ เชœเชพเชฃเซ‡ เช›เซ‡.

10 เชฎเชฟเชจเชฟเชŸเชฎเชพเช‚ 15 เชชเซเชฐเชถเซเชจเซ‹, เชเช• เชธเชฎเชฏเซ‡ เชเช• เชชเซเชฐเชถเซเชจ เช†เชชเชตเชพเชฎเชพเช‚ เช†เชตเซ‡ เช›เซ‡.

เช† test เชฎเชพเชŸเซ‡ เชฏเซ‹เช—เซเชฏ เชญเซ‚เชฎเชฟเช•เชพเช“

HVAC service and maintenance technicians, building maintenance and facilities technicians, chiller and plant operators, and apprentices nearing the end of their training.

See applied HVAC knowledge in context

  1. Check diagnosis, not just job history

    A resume can describe service experience, but it does not show how a candidate interprets an equipment log, gauge reading, or symptom. This HVAC assessment test presents short situations involving chillers, pumps, air handlers, air conditioners, and dehumidifiers.

  2. Focus on maintenance decisions

    Questions ask candidates to choose a likely fault, the next check, or an appropriate maintenance step. The multiple-choice format can ask for one right answer or every right answer, and tests whether the candidate can apply the material rather than only recognize it.

  3. Cover three connected skill areas

    The HVAC skills test covers chillers and water distribution, air distribution and ventilation, and air conditioners and dehumidifiers. Use those areas to focus a follow-up conversation on the equipment and duties relevant to your opening.

  4. Keep the initial check brief

    The test takes 10 minutes and has 15 questions. That gives you a focused skills signal before deciding whether to spend more hiring time on a work sample or interview. Candidates may use scratch paper for the light arithmetic.

เชฆเชฐเซ‡เช• เช‰เชฎเซ‡เชฆเชตเชพเชฐ เชฎเชพเชŸเซ‡ เชคเชฎเชจเซ‡ เชถเซเช‚ เชฎเชณเซ‡ เช›เซ‡

เชจเชฎเซ‚เชจเชพเชจเซ‹ เชฐเชฟเชชเซ‹เชฐเซเชŸ (เช•เชพเชฒเซเชชเชจเชฟเช• เชกเซ‡เชŸเชพ)HVAC (เชนเซ€เชŸเชฟเช‚เช—, เชตเซ‡เชจเซเชŸเชฟเชฒเซ‡เชถเชจ เช…เชจเซ‡ เชเชฐ เช•เชจเซเชกเชฟเชถเชจเชฟเช‚เช—)
73%เชชเชฐเซเชธเซ‡เชจเซเชŸเชพเช‡เชฒ 51. เชฌเซ‡เชจเซเชšเชฎเชพเชฐเซเช•: HireValid เช‰เชฎเซ‡เชฆเชตเชพเชฐเซ‹, n = 1,593
Chillers and water distribution73%
Air distribution and ventilation74%
Air conditioners and dehumidifiers71%
Integrity Scoreเช‰เชšเซเชš เชตเชฟเชถเซเชตเชพเชธ
  • เชธเชฎเช—เซเชฐ เชธเชฎเชฏ เชฆเชฐเชฎเชฟเชฏเชพเชจ เชŸเซ‡เชธเซเชŸ เชŸเซ…เชฌ เชชเชฐ เชœ เชฐเชนเซเชฏเชพ
  • เชชเซ‡เชธเซเชŸ เช•เชฐเซ‡เชฒเชพ เชœเชตเชพเชฌเซ‹ เชจเชฅเซ€
  • เชธเซเชฅเชฟเชฐ เช—เชคเชฟเช เชœเชตเชพเชฌ เช†เชชเซเชฏเชพ

เชธเซเช•เซ‹เชฐ, เชชเซเชฐเซ‹เชซเชพเช‡เชฒ เช…เชจเซ‡ เช…เช–เช‚เชกเชฟเชคเชคเชพเชจเชพ เชธเช‚เช•เซ‡เชคเซ‹ เช‡เชจเซเชŸเชฐเชตเซเชฏเซ‚ เชธเชพเชฅเซ‡ เชธเชฎเซ€เช•เซเชทเชพ เช•เชฐเชตเชพ เชฎเชพเชŸเซ‡เชจเชพ เชชเซเชฐเชพเชตเชพ เช›เซ‡, เช•เซเชฏเชพเชฐเซ‡เชฏ เชธเซเชตเชšเชพเชฒเชฟเชค เชจเชฟเชฐเซเชฃเชฏ เชจเชฅเซ€.

เช† เชŸเซ‡เชธเซเชŸ เชฎเชซเชคเชฎเชพเช‚ เช…เชœเชฎเชพเชตเซ‹

How the online test handles integrity signals

Each candidate receives a different set of questions from large question pools. Question order and answer options are shuffled. The browser receives one question at a time, and answer keys stay on HireValidโ€™s servers. Timing runs on the server; reloading returns the same question with only the time left. Question text cannot be copied or selected, and a blocked copy attempt is recorded in the timeline. HireValid records signals such as time away from the test tab, pastes into answers, and answers faster than a question can be read. It summarizes these in an Integrity Score and evidence timeline for employer review; the signals never decide on their own. With the candidateโ€™s consent, an employer can add webcam photos at random moments.

Use the result as evidence, not a verdict

Review the score alongside the candidateโ€™s work history and a job-relevant work sample. For example, give candidates an equipment log or a set of gauge readings and ask them to explain their next check. Keep the sample tied to the duties of the opening, and assess the reasoning and maintenance choices you need for that role. Then use a structured interview with the same core questions for each candidate. The HVAC test result is one signal for a person to review, not a pass mark or a decision by itself. Its reliability is provisional and is reported once 200 candidates have completed it.

Structured interview questions

  1. You see a chiller log with a change in readings and a reported performance issue. How would you decide what to check next?

    Listen for a clear sequence that connects the stated readings and symptom to a next check. Ask the candidate to explain the reasoning rather than name a fault without support.

  2. Occupants report a ventilation complaint in an area served by an air handler. What information would you review before choosing a maintenance step?

    Listen for the candidate to use the situationโ€™s details and relevant readings, and to explain how those details inform a practical check or maintenance choice.

  3. A dehumidifier is not performing as expected. How would you investigate the symptoms and decide what to do next?

    Listen for a reasoned approach to the stated symptoms, a relevant next check, and a maintenance step that follows from the information available.

  4. Tell me how you would approach a pump or water-loop issue when the available readings are limited.

    Listen for careful use of the information provided, acknowledgment of what remains unknown, and a sensible next step rather than an unsupported conclusion.

Match the test to the role level

This is an intermediate test for HVAC service and maintenance technicians, building maintenance and facilities technicians, chiller and plant operators, and apprentices nearing the end of training. Its scenarios concern keeping equipment running and diagnosing faults from readings. It is not tailored to any one countryโ€™s codes, licensing, or regulations. Each question gives readings with units in full and does not require conversion between unit systems. If you are considering a broader hiring process, see the pre-employment testing guide for general context.

Connect test topics to daily duties

The questions draw on equipment logs, gauge readings, and symptoms from chillers, pumps, air handlers, air conditioners, and dehumidifiers. That makes the test relevant when the role involves chiller and water distribution, air distribution and ventilation, or cooling and dehumidification. Questions use plain wording, names and sites vary, and any pressure-temperature value needed is shown in the question rather than recalled from a chart. Candidates may use scratch paper; arithmetic is light. The format is multiple choice, and candidates cannot return to an earlier question.

Add a practical follow-up

The 4-question, 4-minute practice set gives candidates a chance to see the format before the 15-question hiring test. Use the result as one part of a review, then consider a work sample based on the roleโ€™s equipment and duties. For other openings, browse the test library. For how HireValid describes its test-building approach, read How we build our tests.

เชจเซเชฏเชพเชฏเชธเช‚เช—เชคเชคเชพ เช…เชจเซ‡ เชœเชฐเซ‚เชฐเซ€ เชธเซเชตเชฟเชงเชพเช“

Questions cover equipment and practices common to most countries rather than any one country's codes, licensing or regulations. Each question states its readings with their units in full and never asks the candidate to convert between unit systems; any pressure-temperature value a question needs is shown in the question rather than recalled from a chart. Names and sites vary, the wording is plain, and the arithmetic is light enough for scratch paper.

เชธเซเชตเชฟเชงเชพ เชคเชฐเซ€เช•เซ‡ เชคเชฎเซ‡ เช•เซ‹เชˆเชชเชฃ เช‰เชฎเซ‡เชฆเชตเชพเชฐเชจเซ‡ เชตเชงเชพเชฐเชพเชจเซ‹ เชธเชฎเชฏ เช†เชชเซ€ เชถเช•เซ‹ เช›เซ‹. เชชเชฐเชฟเชฃเชพเชฎเซ‹ เชตเซเชฏเช•เซเชคเชฟ เชฆเซเชตเชพเชฐเชพ เชธเชฎเซ€เช•เซเชทเชพ เช•เชฐเชตเชพ เชฎเชพเชŸเซ‡เชจเชพ เชชเซเชฐเชพเชตเชพ เช›เซ‡, เช•เซเชฏเชพเชฐเซ‡เชฏ เช†เชชเชฎเซ‡เชณเซ‡ เชฒเซ‡เชตเชพเชคเซ‹ เชจเชฟเชฐเซเชฃเชฏ เชจเชนเซ€เช‚.

Provisional: reliability is reported once 200 candidates have completed it.

เชจเชฟเชทเซเชชเช•เซเชทเชคเชพ เช…เช‚เช—เซ‡เชจเซ‹ เช…เชฎเชพเชฐเซ‹ เช…เชญเชฟเช—เชฎ เชตเชพเช‚เชšเซ‹

เชŸเซ‡เชธเซเชŸเชจเซ€ เชตเชฟเช—เชคเซ‹

A short, timed set of service scenarios from heating, ventilation and air conditioning work. Candidates read equipment logs, gauge readings and symptoms from chillers, pumps, air handlers, air conditioners and dehumidifiers, then choose the likely fault, the next check or the right maintenance step.

  • เชชเซเชฐเชถเซเชจเซ‹ เช…เช‚เช—เซเชฐเซ‡เชœเซ€เชฎเชพเช‚ เช›เซ‡.
  • เชฎเช‚เชœเซ‚เชฐ เชธเชนเชพเชฏ: เชฐเชซ เช•เชพเชฎ เชฎเชพเชŸเซ‡เชจเซเช‚ เช•เชพเช—เชณ.
  • เชฆเชฐเซ‡เช• เชชเซเชฐเชถเซเชจเชจเซ‹ เชœเชตเชพเชฌ เช•เซเชฐเชฎ เชชเซเชฐเชฎเชพเชฃเซ‡ เชเช• เชœ เชตเชพเชฐ เช†เชชเซ€ เชถเช•เชพเชฏ เช›เซ‡; เชชเชพเช›เชพ เชœเชˆ เชถเช•เชพเชคเซเช‚ เชจเชฅเซ€.
  • เชธเชฎเชฏเชฎเชฐเซเชฏเชพเชฆเชพเชตเชพเชณเชพ test เชชเชนเซ‡เชฒเชพเช‚ 4 เชชเซเชฐเซ‡เช•เซเชŸเชฟเชธ เชชเซเชฐเชถเซเชจเซ‹, 4 เชฎเชฟเชจเชฟเชŸ.

เชตเชพเชฐเช‚เชตเชพเชฐ เชชเซ‚เช›เชพเชคเชพ เชชเซเชฐเชถเซเชจเซ‹

What does the HVAC test measure?+

The test measures practical knowledge for keeping chillers, water loops, air distribution, air conditioners, and dehumidifiers running, and diagnosing faults from readings. Candidates read short situations, tables, or statements and choose an answer. Questions may ask for a likely fault, a next check, or a maintenance step. The three areas are chillers and water distribution, air distribution and ventilation, and air conditioners and dehumidifiers.

Which roles is this HVAC test for?+

It is intended for HVAC service and maintenance technicians, building maintenance and facilities technicians, chiller and plant operators, and apprentices nearing the end of their training. The intermediate level and equipment scenarios make it relevant when a role involves maintaining or diagnosing the systems covered by the test. It does not assess a country-specific code, licensing requirement, or regulation.

How long is the HVAC assessment, and what is its format?+

The assessment has 15 questions and takes 10 minutes. It uses multiple choice: a candidate reads a short situation, table, or statement, then selects the right answer or every right answer. Questions use equipment logs, gauge readings, and symptoms. The test is available in English, candidates may use scratch paper, and they cannot go back to earlier questions.

What equipment and situations appear in the HVAC test?+

Scenarios can involve chillers, pumps, air handlers, air conditioners, and dehumidifiers. They ask candidates to interpret readings or symptoms and choose a likely fault, next check, or maintenance step. The questions cover chiller and water distribution, air distribution and ventilation, and cooling and dehumidification, rather than asking candidates only to recite definitions.

Does this HVAC skills test use country-specific codes or unit conversions?+

No. The questions cover equipment and practices common to most countries, not a particular countryโ€™s codes, licensing, or regulations. Readings state their units in full, and candidates are not asked to convert between unit systems. Any pressure-temperature value needed for a question is shown in the question rather than expected from memory of a chart.

Can candidates practice before taking the HVAC test?+

There is a practice set with 4 questions and a 4-minute time limit. It can help candidates see the multiple-choice format, including questions based on a situation, table, or statement. The hiring test itself has 15 questions and a 10-minute limit. Employers can use the practice set to explain the test format, not as evidence of a candidateโ€™s job skills.

How should an employer use the HVAC test result?+

Use it as a signal for a person to review, alongside a role-relevant work sample and a structured interview. You might ask a candidate to explain a next check using an equipment log or readings, then ask the same open-ended interview questions of each candidate. The result is not a pass mark or a hiring decision by itself. Reliability is provisional and will be reported once 200 candidates have completed the test.

เชธเช‚เชฌเช‚เชงเชฟเชค เช•เชธเซ‹เชŸเซ€เช“

เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชญเซŒเชฎเชฟเชคเชฟเช• เชชเชฐเชฟเชฎเชพเชฃ เชจเชฟเชฐเซเชงเชพเชฐเชฃ เช…เชจเซ‡ เชธเชนเชฟเชทเซเชฃเซเชคเชพ (GD&T)

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชฌเชพเช‚เชงเช•เชพเชฎ เชตเซเชฏเชตเชธเซเชฅเชพเชชเชจ

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

CNC เชฎเชถเซ€เชจเชฟเชธเซเชŸ (เช‡เชฎเซเชชเชฟเชฐเชฟเชฏเชฒ เชฎเชพเชช เชชเชฆเซเชงเชคเชฟ)

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เช‰เชชเช•เชฐเชฃเซ‹เชจเซ€ เชœเชพเชณเชตเชฃเซ€

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชตเซ€เชœเชณเซ€เชจเชพ เชฎเซ‚เชณเชญเซ‚เชค เชธเชฟเชฆเซเชงเชพเช‚เชคเซ‹

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“
เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

GHS เชธเชฒเชพเชฎเชคเซ€

10 เชฎเชฟเชจเชฟเชŸ, เชญเซ‚เชฎเชฟเช•เชพ-เชตเชฟเชถเชฟเชทเซเชŸ เช•เซŒเชถเชฒเซเชฏเซ‹

เชœเซเช“

เชคเชฎเชพเชฐเซ€ เช†เช—เชพเชฎเซ€ เชญเชฐเชคเซ€เชฎเชพเช‚ HVAC (เชนเซ€เชŸเชฟเช‚เช—, เชตเซ‡เชจเซเชŸเชฟเชฒเซ‡เชถเชจ เช…เชจเซ‡ เชเชฐ เช•เชจเซเชกเชฟเชถเชจเชฟเช‚เช—) เชŸเซ‡เชธเซเชŸเชจเซ‹ เช‰เชชเชฏเซ‹เช— เช•เชฐเซ‹

เชฆเชฐเซ‡เช• เชชเซเชฒเชพเชจเชฎเชพเช‚, Free เชธเชนเชฟเชค, เชŸเซ‡เชธเซเชŸเชจเซ€ เชธเช‚เชชเซ‚เชฐเซเชฃ เชฒเชพเช‡เชฌเซเชฐเซ‡เชฐเซ€ เชธเชพเชฎเซ‡เชฒ เช›เซ‡.

เช† เชŸเซ‡เชธเซเชŸ เชฎเชซเชคเชฎเชพเช‚ เช…เชœเชฎเชพเชตเซ‹Free เชชเซเชฒเชพเชจ. เช•เซเชฐเซ‡เชกเชฟเชŸ เช•เชพเชฐเซเชกเชจเซ€ เชœเชฐเซ‚เชฐ เชจเชฅเซ€.
Free เชชเซเชฒเชพเชจ. เช•เซเชฐเซ‡เชกเชฟเชŸ เช•เชพเชฐเซเชกเชจเซ€ เชœเชฐเซ‚เชฐ เชจเชฅเซ€.เช† เชŸเซ‡เชธเซเชŸ เชฎเชซเชคเชฎเชพเช‚ เช…เชœเชฎเชพเชตเซ‹

เชธเช‚เชชเชพเชฆเช•เซ€เชฏ เชŸเซ€เชฎ เชตเชฟเชถเซ‡

HireValidเชจเซ€ เชธเช‚เชชเชพเชฆเช•เซ€เชฏ เชŸเซ€เชฎ เชฆเซเชตเชพเชฐเชพ เชฒเช–เชพเชฏเซ‡เชฒเซเช‚ เช…เชจเซ‡ เชคเชฅเซเชฏเซ‹เชจเซ€ เชšเช•เชพเชธเชฃเซ€ เช•เชฐเซ‡เชฒเซเช‚. เชคเชชเชพเชธเซ‡เชฒเชพ เชธเซเชฐเซ‹เชคเซ‹ . เชธเช‚เชชเชพเชฆเช•เซ€เชฏ เชจเซ€เชคเชฟ เชตเชพเช‚เชšเซ‹.