KỸ NĂNG LẬP TRÌNH

Embedded Systems test for hiring

See how candidates reason about microcontroller design, firmware, and faults in device code.

  • 10 phút
  • 15 câu hỏi
  • Trung cấp
  • Trắc nghiệm nhiều lựa chọn
  • Câu hỏi bằng Tiếng Anh
  • Điện thoại và máy tính

Câu trả lời ngắn gọn

The Embedded Systems test is a timed check of practical knowledge for building and supporting software that runs on microcontrollers. It measures design trade-offs, peripherals, C for small devices, and fault finding. Use it with intermediate firmware and embedded software engineers, microcontroller developers, and other engineers who write or test device code.

Nội dung đánh giá

Knowledge of embedded design trade-offs, microcontroller peripherals, C for small devices, and finding and preventing faults in device code.

System design and trade-offs

Questions ask candidates to weigh design choices when timing, memory, and power are limited.

Microcontroller peripherals

Questions cover setting up on-chip peripherals on a microcontroller.

Firmware in C

Questions use short standard C code written for small devices.

Fault finding and verification

Candidates track faults from symptoms, signal traces, and short code listings, including how to prevent them.

Các dạng câu hỏi

Trắc nghiệm nhiều lựa chọn

Ứng viên: Đọc một tình huống, bảng hoặc nhận định ngắn rồi chọn đáp án đúng hoặc tất cả các đáp án đúng.

Bạn sẽ thấy: Ứng viên có hiểu đủ sâu để áp dụng kiến thức hay chỉ nhận biết được kiến thức đó.

15 câu hỏi trong 10 phút, lần lượt từng câu một.

Các vị trí phù hợp với bài đánh giá này

Firmware and embedded software engineers, microcontroller developers, electronics engineers who also write device code, and test engineers working on embedded products.

Evidence from device-code decisions

  1. See trade-offs in context

    Questions put timing, memory, and power limits together, showing how candidates approach constraints found in embedded design.

  2. Keep vendor familiarity from deciding

    Each question describes a generic microcontroller and states the clock figures, register layouts, and data widths needed to answer it.

  3. Review fault-finding approaches

    Symptoms, signal traces, and short code listings show how candidates approach problems in device code.

  4. C as written for small devices

    Code is short standard C with fixed-width types, so you see whether a candidate reads data widths and register values correctly rather than which toolchain they know.

Thông tin bạn nhận được về từng ứng viên

Báo cáo mẫu (dữ liệu hư cấu)Hệ thống nhúng
70%Phân vị 44. Mốc tham chiếu: ứng viên HireValid, n = 1.005
System design and trade-offs76%
Microcontroller peripherals73%
Firmware in C66%
Fault finding and verification63%
Integrity ScoreĐộ tin cậy cao
  • Luôn ở trên thẻ làm bài kiểm tra
  • Không dán câu trả lời
  • Trả lời với tốc độ ổn định

Điểm số, hồ sơ và tín hiệu về tính liêm chính là những bằng chứng để bạn xem xét cùng với buổi phỏng vấn, không bao giờ là căn cứ cho quyết định tự động.

Dùng thử bài kiểm tra này miễn phí

Test integrity signals for review

Each candidate receives a different question set, with questions in a different order and answer options shuffled. The browser shows one question at a time, and answer keys stay on HireValid’s servers. The 10-minute timer runs on the server; reloading returns the same question with only the time left, and candidates cannot go back. Question text cannot be copied or selected, and blocked copy attempts are recorded. HireValid records signals such as time away from the test tab, pastes into answers, and answers faster than a question can be read. The employer reviews an Integrity Score and evidence timeline; the system does not decide on its own. With candidate consent, random webcam photos can be added. See how we build our tests.

Use the score as one signal

Review the score alongside a work sample that reflects the device-code work in the role and a structured interview. The test is evidence for a person to consider, not a hiring decision by itself. Ask candidates to explain choices or investigate a scenario, then compare their reasoning with the work sample. For more guidance, see our pre-employment testing guide and the Clean Code test for a related programming skill.

Structured interview questions

  1. How would you choose between two design approaches when timing, memory, and power constraints compete?

    Listen for how the candidate weighs the stated constraints and explains the trade-offs behind a choice.

  2. Walk me through how you would set up an on-chip peripheral for a device task.

    Listen for a clear sequence of decisions and attention to the microcontroller details in the scenario.

  3. A device shows a fault and you have a signal trace and a short C listing. How would you investigate?

    Listen for a reasoned path from symptoms through the trace and code, plus how the candidate would verify a finding.

  4. Tell me about a device-code fault you would try to prevent, and how you would approach that.

    Listen for a concrete prevention approach tied to firmware or verification work, rather than a definition.

Tính công bằng và các điều chỉnh phù hợp

Each question describes a generic microcontroller in its own text, stating the clock figures, register layouts and data widths it needs, so no single vendor's parts, tools or libraries give anyone an advantage. Code is short standard C with fixed-width types, the language is plain US English without idioms, units are metric, and the arithmetic is light enough for the scratch paper every candidate may use.

Bạn có thể cho bất kỳ ứng viên nào thêm thời gian như một biện pháp hỗ trợ. Kết quả là bằng chứng để con người xem xét, không bao giờ là quyết định tự động.

Provisional: reliability is reported once 200 candidates have completed it.

Đọc cách tiếp cận của chúng tôi về tính công bằng

Chi tiết bài kiểm tra

A timed check of practical knowledge for building and supporting software that runs on microcontrollers. Questions cover design trade-offs under tight timing, memory and power limits, setting up on-chip peripherals, C code written for small devices, and tracking down faults from symptoms, signal traces and short code listings.

  • Câu hỏi bằng tiếng Anh.
  • Được phép sử dụng: Giấy nháp.
  • Mỗi câu hỏi chỉ được trả lời một lần, theo thứ tự và không thể quay lại.
  • 4 câu hỏi luyện tập, 3 phút, trước bài kiểm tra tính giờ.

Câu hỏi thường gặp

How does the Embedded Systems test keep questions fair across microcontroller backgrounds?+

Each question describes a generic microcontroller and includes the clock figures, register layouts, and data widths needed for that question. The code is short standard C with fixed-width types. The wording uses plain US English without idioms, units are metric, and the arithmetic is light enough for scratch paper.

Can candidates use scratch paper on the Embedded Systems test?+

Yes. Every candidate may use scratch paper for the light arithmetic, such as working from the clock figures a question states. Each question is answered once, in order, with no going back to an earlier one.

What practice is available before the Embedded Systems test?+

Candidates can use a practice set of 4 questions with a 3-minute time limit. The actual test has 15 multiple-choice questions and a 10-minute time limit. The practice set gives candidates a chance to see the question format before the hiring assessment.

Which roles suit the intermediate Embedded Systems test?+

It is intended for firmware and embedded software engineers, microcontroller developers, electronics engineers who also write device code, and test engineers working on embedded products. It is set at an intermediate level, for people who already do this work.

Bài kiểm tra liên quan

Sử dụng bài kiểm tra Hệ thống nhúng trong đợt tuyển dụng tiếp theo

Mọi gói, kể cả Free, đều có đầy đủ thư viện bài kiểm tra.

Dùng thử bài kiểm tra này miễn phíGói Free. Không cần thẻ tín dụng.
Gói Free. Không cần thẻ tín dụng.Dùng thử bài kiểm tra này miễn phí

Giới thiệu đội ngũ biên tập

Được đội ngũ biên tập HireValid biên soạn và kiểm chứng thông tin. Nguồn đã kiểm tra . Đọc chính sách biên tập.