CNC machinist test for hiring
See how candidates reason through CNC work in inch units before you interview.
- 10 phút
- 15 câu hỏi
- Trung cấp
- Trắc nghiệm nhiều lựa chọn
- Câu hỏi bằng Tiếng Anh
- Điện thoại và máy tính
Câu trả lời ngắn gọn
The CNC machinist test is a timed, job-focused assessment for CNC machinists, CNC operators moving into setup or programming, manufacturing and production technicians, and general machinists who work with inch drawings. It measures G-code, machine setup and operation, and machining process planning through multiple-choice questions based on short program listings, setup sheets, offset tables, and part callouts.
Nội dung đánh giá
Reading and writing G-code in inch units, setting up and running CNC machines, and planning the order of machining operations.
CNC programming
Candidates read and write G-code in inch units using short program listings.
Machine setup and operation
Candidates work with setup sheets, offset tables, and choices about running or setting up CNC machines.
Process planning
Candidates choose an appropriate order for machining operations based on part callouts and job details.
Các dạng câu hỏi
Trắc nghiệm nhiều lựa chọn
Ứng viên: Đọc một tình huống, bảng hoặc nhận định ngắn rồi chọn đáp án đúng hoặc tất cả các đáp án đúng.
Bạn sẽ thấy: Ứng viên có hiểu đủ sâu để áp dụng kiến thức hay chỉ nhận biết được kiến thức đó.
15 câu hỏi trong 10 phút, lần lượt từng câu một.
Các vị trí phù hợp với bài đánh giá này
CNC machinists, CNC operators moving into setup or programming, manufacturing and production technicians, and general machinists who work with inch drawings.
Useful evidence for CNC hiring
Look beyond job titles
See how candidates handle inch-unit G-code, setup information, and machining decisions, rather than relying on resume descriptions alone.
Focus interviews on the work
Separate scores for CNC programming, machine setup and operation, and process planning show which area to probe with machinists and operators moving into setup.
Test with shop documents
Questions use program listings, setup sheets, offset tables, and part callouts, so the score reflects decisions a machinist makes on the job.
Keep the first check brief
The assessment takes 10 minutes and has 15 questions. An on-screen calculator is available for speeds, feeds, and tolerances.
Thông tin bạn nhận được về từng ứng viên
- Luôn ở trên thẻ làm bài kiểm tra
- Không dán câu trả lời
- Trả lời với tốc độ ổn định
Điểm số, hồ sơ và tín hiệu về tính liêm chính là những bằng chứng để bạn xem xét cùng với buổi phỏng vấn, không bao giờ là căn cứ cho quyết định tự động.
Dùng thử bài kiểm tra này miễn phí
Test controls and integrity signals
Each candidate gets a different set of questions from large question pools. Question order and answer options are shuffled, and the browser receives one question at a time. Timing runs on the server. Reloading brings back the same question with only the time left. The test takes 10 minutes, and candidates cannot go back to earlier questions. Question text cannot be copied or selected; blocked copy attempts are recorded in the timeline. HireValid records signals such as time away from the test tab, pastes into answers, and answers faster than a question can be read. The employer reviews them in an Integrity Score and evidence timeline, which never decide on their own. With candidate consent, webcam photos can be added at random moments.
Cách chúng tôi ngăn chặn gian lận bằng AI · Tín hiệu về tính liêm chính
Use the score as evidence
Review the score alongside a work sample and a structured interview. Ask candidates to explain how they would approach an inch-unit setup or sequence machining operations, then compare that reasoning with their sub-skill scores. The score is one signal for your review, not a hiring decision. For adjacent skills, see Geometric Dimensioning & Tolerancing (GD&T), Mechanical Reasoning, and HVAC (Heating, Ventilation, and Air Conditioning).
Structured interview questions
Tell me how you would decide the order of operations for a part shown on an inch drawing.
Listen for a clear sequence and how the candidate uses the part callouts to guide the plan.
Describe how you would check a setup sheet and offset table before running a CNC job.
Listen for a deliberate review of setup information and how the candidate would resolve uncertainty before operation.
Walk me through how you would respond if a program listing did not match the part callouts.
Listen for careful comparison of the information and a reasoned next step, rather than an unsupported guess.
Tìm hiểu cách chấm điểm và các tiêu chuẩn đối chiếu
Tính công bằng và các điều chỉnh phù hợp
Questions use the inch units, G and M codes and shop terms the job itself requires, written in plain US English without idioms or local references. Any chart a question depends on, such as tap drill sizes or surface speeds, is shown in the question, so nothing rests on memorizing one shop's tables. Code is written in the common ISO style most controls share, avoiding features that work differently from one control maker to another. Names in setup notes come from many backgrounds, and every candidate may use the on-screen calculator and scratch paper.
Bạn có thể cho bất kỳ ứng viên nào thêm thời gian như một biện pháp hỗ trợ. Kết quả là bằng chứng để con người xem xét, không bao giờ là quyết định tự động.
Provisional: reliability is reported once 200 candidates have completed it.
Chi tiết bài kiểm tra
A timed, job-focused check for people who run and program CNC mills and lathes in inch units. Candidates read short program listings, setup sheets, offset tables and part callouts, and choose what a skilled machinist would write, set or do next. Each question has its own short timer, and an on-screen calculator is available for speeds, feeds and tolerances.
- Câu hỏi bằng tiếng Anh.
- Được phép sử dụng: Máy tính, Giấy nháp.
- Mỗi câu hỏi chỉ được trả lời một lần, theo thứ tự và không thể quay lại.
- 4 câu hỏi luyện tập, 4 phút, trước bài kiểm tra tính giờ.
Câu hỏi thường gặp
What does the CNC machinist test measure?+
It measures reading and writing G-code in inch units, setting up and running CNC machines, and planning the order of machining operations. Candidates respond to short program listings, setup sheets, offset tables, and part callouts.
How long is the CNC machinist test, and what can candidates use?+
The test has 15 multiple-choice questions and takes 10 minutes. Each question has its own short timer, and an on-screen calculator is available for speeds, feeds, and tolerances. Candidates may also use scratch paper.
Is there a practice set for the CNC machinist test?+
Yes. The practice set has 4 questions and takes 4 minutes. It can introduce candidates to the assessment experience before they work through questions on inch-unit G-code, machine setup, and operation planning.
How are CNC machinist test questions written?+
Questions use inch units, G and M codes, and shop terms in plain US English. Any chart needed, such as tap drill sizes or surface speeds, appears in the question. Code uses common ISO style and avoids features that vary by control maker.
Bài kiểm tra liên quan
Quản lý xây dựng
10 phút, Kỹ năng chuyên biệt theo vị trí
Khám pháHVAC (hệ thống sưởi, thông gió và điều hòa không khí)
10 phút, Kỹ năng chuyên biệt theo vị trí
Khám pháGhi kích thước và dung sai hình học (GD&T)
10 phút, Kỹ năng chuyên biệt theo vị trí
Khám pháBảo trì thiết bị
10 phút, Kỹ năng chuyên biệt theo vị trí
Khám pháKiến thức cơ bản về điện
10 phút, Kỹ năng chuyên biệt theo vị trí
Khám pháAn toàn theo GHS
10 phút, Kỹ năng chuyên biệt theo vị trí
Khám pháSử dụng bài kiểm tra Thợ gia công CNC (Hệ đo lường Anh) trong đợt tuyển dụng tiếp theo
Mọi gói, kể cả Free, đều có đầy đủ thư viện bài kiểm tra.