āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

CNC machinist test for hiring

See how candidates reason through CNC work in inch units before you interview.

  • 10 āļ™āļēāļ—āļĩ
  • 15 āļ„āļģāļ–āļēāļĄ
  • āļĢāļ°āļ”āļąāļšāļāļĨāļēāļ‡
  • āļ›āļĢāļ™āļąāļĒ
  • āļ„āļģāļ–āļēāļĄāđ€āļ›āđ‡āļ™āļ āļēāļĐāļēāļ­āļąāļ‡āļāļĪāļĐ
  • āđ‚āļ—āļĢāļĻāļąāļžāļ—āđŒāđāļĨāļ°āļ„āļ­āļĄāļžāļīāļ§āđ€āļ•āļ­āļĢāđŒāļ•āļąāđ‰āļ‡āđ‚āļ•āđŠāļ°

āļ„āļģāļ•āļ­āļšāļŠāļąāđ‰āļ™āđ†

The CNC machinist test is a timed, job-focused assessment for CNC machinists, CNC operators moving into setup or programming, manufacturing and production technicians, and general machinists who work with inch drawings. It measures G-code, machine setup and operation, and machining process planning through multiple-choice questions based on short program listings, setup sheets, offset tables, and part callouts.

āļ§āļąāļ”āļ­āļ°āđ„āļĢ

Reading and writing G-code in inch units, setting up and running CNC machines, and planning the order of machining operations.

CNC programming

Candidates read and write G-code in inch units using short program listings.

Machine setup and operation

Candidates work with setup sheets, offset tables, and choices about running or setting up CNC machines.

Process planning

Candidates choose an appropriate order for machining operations based on part callouts and job details.

āļĢāļđāļ›āđāļšāļšāļ„āļģāļ–āļēāļĄ

āļ›āļĢāļ™āļąāļĒ

āļœāļđāđ‰āļŠāļĄāļąāļ„āļĢ: āļ­āđˆāļēāļ™āļ‚āđ‰āļ­āļ„āļ§āļēāļĄāļŠāļąāđ‰āļ™ āđ† āļ•āļēāļĢāļēāļ‡ āļŦāļĢāļ·āļ­āļ‚āđ‰āļ­āļ„āļ§āļēāļĄ āđāļĨāđ‰āļ§āđ€āļĨāļ·āļ­āļāļ„āļģāļ•āļ­āļšāļ—āļĩāđˆāļ–āļđāļāļ•āđ‰āļ­āļ‡ āļŦāļĢāļ·āļ­āđ€āļĨāļ·āļ­āļāļ„āļģāļ•āļ­āļšāļ—āļĩāđˆāļ–āļđāļāļ•āđ‰āļ­āļ‡āļ—āļąāđ‰āļ‡āļŦāļĄāļ”

āļ„āļļāļ“āļˆāļ°āđ€āļŦāđ‡āļ™: āļœāļđāđ‰āļŠāļĄāļąāļ„āļĢāļĄāļĩāļ„āļ§āļēāļĄāļĢāļđāđ‰āđƒāļ™āđ€āļ™āļ·āđ‰āļ­āļŦāļēāļĄāļēāļāļžāļ­āļ—āļĩāđˆāļˆāļ°āļ™āļģāđ„āļ›āđƒāļŠāđ‰āđ„āļ”āđ‰āļŦāļĢāļ·āļ­āđ„āļĄāđˆ āđ„āļĄāđˆāđƒāļŠāđˆāđāļ„āđˆāļˆāļģāđ„āļ”āđ‰

āļ„āļģāļ–āļēāļĄ 15 āļ‚āđ‰āļ­ āđƒāļ™āđ€āļ§āļĨāļē 10 āļ™āļēāļ—āļĩ āđ‚āļ”āļĒāđāļŠāļ”āļ‡āļ—āļĩāļĨāļ°āļ‚āđ‰āļ­

āļšāļ—āļšāļēāļ—āļ‡āļēāļ™āļ—āļĩāđˆāđ€āļŦāļĄāļēāļ°āļāļąāļšāđāļšāļšāļ—āļ”āļŠāļ­āļšāļ™āļĩāđ‰

CNC machinists, CNC operators moving into setup or programming, manufacturing and production technicians, and general machinists who work with inch drawings.

Useful evidence for CNC hiring

  1. Look beyond job titles

    See how candidates handle inch-unit G-code, setup information, and machining decisions, rather than relying on resume descriptions alone.

  2. Focus interviews on the work

    Separate scores for CNC programming, machine setup and operation, and process planning show which area to probe with machinists and operators moving into setup.

  3. Test with shop documents

    Questions use program listings, setup sheets, offset tables, and part callouts, so the score reflects decisions a machinist makes on the job.

  4. Keep the first check brief

    The assessment takes 10 minutes and has 15 questions. An on-screen calculator is available for speeds, feeds, and tolerances.

āļŠāļīāđˆāļ‡āļ—āļĩāđˆāļ„āļļāļ“āļˆāļ°āđ„āļ”āđ‰āļĢāļąāļšāļŠāļģāļŦāļĢāļąāļšāļœāļđāđ‰āļŠāļĄāļąāļ„āļĢāđāļ•āđˆāļĨāļ°āļ„āļ™

āļ•āļąāļ§āļ­āļĒāđˆāļēāļ‡āļĢāļēāļĒāļ‡āļēāļ™ (āļ‚āđ‰āļ­āļĄāļđāļĨāļŠāļĄāļĄāļ•āļī)āļŠāđˆāļēāļ‡āđ€āļ„āļĢāļ·āđˆāļ­āļ‡ CNC (āļŦāļ™āđˆāļ§āļĒāļ§āļąāļ”āļ­āļīāļĄāļžāļĩāđ€āļĢāļĩāļĒāļĨ)
72%āđ€āļ›āļ­āļĢāđŒāđ€āļ‹āđ‡āļ™āđ„āļ—āļĨāđŒ 48 āđ€āļāļ“āļ‘āđŒāļ­āđ‰āļēāļ‡āļ­āļīāļ‡: āļœāļđāđ‰āļŠāļĄāļąāļ„āļĢ HireValid āļˆāļģāļ™āļ§āļ™ 930 āļ„āļ™
CNC programming80%
Machine setup and operation75%
Process planning62%
Integrity Scoreāļ„āļ§āļēāļĄāļĄāļąāđˆāļ™āđƒāļˆāļŠāļđāļ‡
  • āļ­āļĒāļđāđˆāđƒāļ™āđāļ—āđ‡āļšāļ—āļ”āļŠāļ­āļšāļ•āļĨāļ­āļ”
  • āđ„āļĄāđˆāļĄāļĩāļ„āļģāļ•āļ­āļšāļ—āļĩāđˆāļ„āļąāļ”āļĨāļ­āļāđāļĨāļ°āļ§āļēāļ‡
  • āļ•āļ­āļšāļ”āđ‰āļ§āļĒāļ„āļ§āļēāļĄāđ€āļĢāđ‡āļ§āļŠāļĄāđˆāļģāđ€āļŠāļĄāļ­

āļ„āļ°āđāļ™āļ™ āđ‚āļ›āļĢāđ„āļŸāļĨāđŒ āđāļĨāļ°āļŠāļąāļāļāļēāļ“āļ”āđ‰āļēāļ™āļ„āļ§āļēāļĄāļ™āđˆāļēāđ€āļŠāļ·āđˆāļ­āļ–āļ·āļ­āđ€āļ›āđ‡āļ™āļ‚āđ‰āļ­āļĄāļđāļĨāļ›āļĢāļ°āļāļ­āļšāđƒāļŦāđ‰āļ„āļļāļ“āļžāļīāļˆāļēāļĢāļ“āļēāļĢāđˆāļ§āļĄāļāļąāļšāļāļēāļĢāļŠāļąāļĄāļ āļēāļĐāļ“āđŒ āđ„āļĄāđˆāđƒāļŠāđˆāļāļēāļĢāļ•āļąāļ”āļŠāļīāļ™āđƒāļˆāđ‚āļ”āļĒāļ­āļąāļ•āđ‚āļ™āļĄāļąāļ•āļī

āđƒāļŠāđ‰āđāļšāļšāļ—āļ”āļŠāļ­āļšāļ™āļĩāđ‰āļŸāļĢāļĩ

Test controls and integrity signals

Each candidate gets a different set of questions from large question pools. Question order and answer options are shuffled, and the browser receives one question at a time. Timing runs on the server. Reloading brings back the same question with only the time left. The test takes 10 minutes, and candidates cannot go back to earlier questions. Question text cannot be copied or selected; blocked copy attempts are recorded in the timeline. HireValid records signals such as time away from the test tab, pastes into answers, and answers faster than a question can be read. The employer reviews them in an Integrity Score and evidence timeline, which never decide on their own. With candidate consent, webcam photos can be added at random moments.

Use the score as evidence

Review the score alongside a work sample and a structured interview. Ask candidates to explain how they would approach an inch-unit setup or sequence machining operations, then compare that reasoning with their sub-skill scores. The score is one signal for your review, not a hiring decision. For adjacent skills, see Geometric Dimensioning & Tolerancing (GD&T), Mechanical Reasoning, and HVAC (Heating, Ventilation, and Air Conditioning).

Structured interview questions

  1. Tell me how you would decide the order of operations for a part shown on an inch drawing.

    Listen for a clear sequence and how the candidate uses the part callouts to guide the plan.

  2. Describe how you would check a setup sheet and offset table before running a CNC job.

    Listen for a deliberate review of setup information and how the candidate would resolve uncertainty before operation.

  3. Walk me through how you would respond if a program listing did not match the part callouts.

    Listen for careful comparison of the information and a reasoned next step, rather than an unsupported guess.

āļ„āļ§āļēāļĄāđ€āļ›āđ‡āļ™āļ˜āļĢāļĢāļĄāđāļĨāļ°āļāļēāļĢāļ›āļĢāļąāļšāđƒāļŦāđ‰āđ€āļŦāļĄāļēāļ°āļŠāļĄ

Questions use the inch units, G and M codes and shop terms the job itself requires, written in plain US English without idioms or local references. Any chart a question depends on, such as tap drill sizes or surface speeds, is shown in the question, so nothing rests on memorizing one shop's tables. Code is written in the common ISO style most controls share, avoiding features that work differently from one control maker to another. Names in setup notes come from many backgrounds, and every candidate may use the on-screen calculator and scratch paper.

āļ„āļļāļ“āļŠāļēāļĄāļēāļĢāļ–āđƒāļŦāđ‰āđ€āļ§āļĨāļēāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄāđāļāđˆāļœāļđāđ‰āļŠāļĄāļąāļ„āļĢāļ„āļ™āđƒāļ”āļāđ‡āđ„āļ”āđ‰āđ€āļžāļ·āđˆāļ­āđ€āļ›āđ‡āļ™āļāļēāļĢāļ›āļĢāļąāļšāļ•āļēāļĄāļ„āļ§āļēāļĄāđ€āļŦāļĄāļēāļ°āļŠāļĄ āļœāļĨāļĨāļąāļžāļ˜āđŒāđ€āļ›āđ‡āļ™āļ‚āđ‰āļ­āļĄāļđāļĨāļ›āļĢāļ°āļāļ­āļšāļāļēāļĢāļžāļīāļˆāļēāļĢāļ“āļēāļ‚āļ­āļ‡āļšāļļāļ„āļ„āļĨ āđ„āļĄāđˆāđƒāļŠāđˆāļāļēāļĢāļ•āļąāļ”āļŠāļīāļ™āđƒāļˆāđ‚āļ”āļĒāļ­āļąāļ•āđ‚āļ™āļĄāļąāļ•āļī

Provisional: reliability is reported once 200 candidates have completed it.

āļ­āđˆāļēāļ™āđāļ™āļ§āļ—āļēāļ‡āļ”āđ‰āļēāļ™āļ„āļ§āļēāļĄāđ€āļ›āđ‡āļ™āļ˜āļĢāļĢāļĄāļ‚āļ­āļ‡āđ€āļĢāļē

āļĢāļēāļĒāļĨāļ°āđ€āļ­āļĩāļĒāļ”āđāļšāļšāļ—āļ”āļŠāļ­āļš

A timed, job-focused check for people who run and program CNC mills and lathes in inch units. Candidates read short program listings, setup sheets, offset tables and part callouts, and choose what a skilled machinist would write, set or do next. Each question has its own short timer, and an on-screen calculator is available for speeds, feeds and tolerances.

  • āļ„āļģāļ–āļēāļĄāđ€āļ›āđ‡āļ™āļ āļēāļĐāļēāļ­āļąāļ‡āļāļĪāļĐ
  • āļ­āļļāļ›āļāļĢāļ“āđŒāļŠāđˆāļ§āļĒāļ—āļĩāđˆāļ­āļ™āļļāļāļēāļ•: āđ€āļ„āļĢāļ·āđˆāļ­āļ‡āļ„āļīāļ”āđ€āļĨāļ‚, āļāļĢāļ°āļ”āļēāļĐāļ—āļ”
  • āļ•āļ­āļšāļ„āļģāļ–āļēāļĄāđāļ•āđˆāļĨāļ°āļ‚āđ‰āļ­āđ„āļ”āđ‰āđ€āļžāļĩāļĒāļ‡āļ„āļĢāļąāđ‰āļ‡āđ€āļ”āļĩāļĒāļ§āļ•āļēāļĄāļĨāļģāļ”āļąāļš āđāļĨāļ°āļĒāđ‰āļ­āļ™āļāļĨāļąāļšāđ„āļ›āđ„āļĄāđˆāđ„āļ”āđ‰
  • āļ„āļģāļ–āļēāļĄāļāļķāļāļŦāļąāļ” 4 āļ‚āđ‰āļ­ āđƒāļŠāđ‰āđ€āļ§āļĨāļē 4 āļ™āļēāļ—āļĩāļāđˆāļ­āļ™āđ€āļĢāļīāđˆāļĄāđāļšāļšāļ—āļ”āļŠāļ­āļšāļˆāļąāļšāđ€āļ§āļĨāļē

āļ„āļģāļ–āļēāļĄāļ—āļĩāđˆāļžāļšāļšāđˆāļ­āļĒ

What does the CNC machinist test measure?+

It measures reading and writing G-code in inch units, setting up and running CNC machines, and planning the order of machining operations. Candidates respond to short program listings, setup sheets, offset tables, and part callouts.

How long is the CNC machinist test, and what can candidates use?+

The test has 15 multiple-choice questions and takes 10 minutes. Each question has its own short timer, and an on-screen calculator is available for speeds, feeds, and tolerances. Candidates may also use scratch paper.

Is there a practice set for the CNC machinist test?+

Yes. The practice set has 4 questions and takes 4 minutes. It can introduce candidates to the assessment experience before they work through questions on inch-unit G-code, machine setup, and operation planning.

How are CNC machinist test questions written?+

Questions use inch units, G and M codes, and shop terms in plain US English. Any chart needed, such as tap drill sizes or surface speeds, appears in the question. Code uses common ISO style and avoids features that vary by control maker.

āđāļšāļšāļ—āļ”āļŠāļ­āļšāļ—āļĩāđˆāđ€āļāļĩāđˆāļĒāļ§āļ‚āđ‰āļ­āļ‡

āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļāļēāļĢāļšāļĢāļīāļŦāļēāļĢāļ‡āļēāļ™āļāđˆāļ­āļŠāļĢāđ‰āļēāļ‡

10 āļ™āļēāļ—āļĩ, āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ”āļđāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄ
āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļĢāļ°āļšāļšāļ—āļģāļ„āļ§āļēāļĄāļĢāđ‰āļ­āļ™ āļĢāļ°āļšāļēāļĒāļ­āļēāļāļēāļĻ āđāļĨāļ°āļ›āļĢāļąāļšāļ­āļēāļāļēāļĻ (HVAC)

10 āļ™āļēāļ—āļĩ, āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ”āļđāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄ
āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļāļēāļĢāļāļģāļŦāļ™āļ”āļ‚āļ™āļēāļ”āđāļĨāļ°āļ„āđˆāļēāļ„āļ§āļēāļĄāđ€āļœāļ·āđˆāļ­āļ—āļēāļ‡āđ€āļĢāļ‚āļēāļ„āļ“āļīāļ• (GD&T)

10 āļ™āļēāļ—āļĩ, āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ”āļđāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄ
āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļāļēāļĢāļšāļģāļĢāļļāļ‡āļĢāļąāļāļĐāļēāļ­āļļāļ›āļāļĢāļ“āđŒ

10 āļ™āļēāļ—āļĩ, āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ”āļđāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄ
āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļžāļ·āđ‰āļ™āļāļēāļ™āđ„āļŸāļŸāđ‰āļē

10 āļ™āļēāļ—āļĩ, āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ”āļđāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄ
āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ„āļ§āļēāļĄāļ›āļĨāļ­āļ”āļ āļąāļĒāļ•āļēāļĄ GHS

10 āļ™āļēāļ—āļĩ, āļ—āļąāļāļĐāļ°āđ€āļ‰āļžāļēāļ°āļŠāļģāļŦāļĢāļąāļšāđāļ•āđˆāļĨāļ°āļšāļ—āļšāļēāļ—

āļ”āļđāđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄ

āđƒāļŠāđ‰āđāļšāļšāļ—āļ”āļŠāļ­āļš āļŠāđˆāļēāļ‡āđ€āļ„āļĢāļ·āđˆāļ­āļ‡ CNC (āļŦāļ™āđˆāļ§āļĒāļ§āļąāļ”āļ­āļīāļĄāļžāļĩāđ€āļĢāļĩāļĒāļĨ) āđƒāļ™āļāļēāļĢāļˆāđ‰āļēāļ‡āļ‡āļēāļ™āļ„āļĢāļąāđ‰āļ‡āļ•āđˆāļ­āđ„āļ›

āļ—āļļāļāđāļžāđ‡āļāđ€āļāļˆ āļĢāļ§āļĄāļ–āļķāļ‡ Free āļĄāļĩāļ„āļĨāļąāļ‡āđāļšāļšāļ—āļ”āļŠāļ­āļšāļ„āļĢāļšāļ—āļąāđ‰āļ‡āļŦāļĄāļ”

āđƒāļŠāđ‰āđāļšāļšāļ—āļ”āļŠāļ­āļšāļ™āļĩāđ‰āļŸāļĢāļĩāđāļžāđ‡āļāđ€āļāļˆ Free āđ„āļĄāđˆāļ•āđ‰āļ­āļ‡āđƒāļŠāđ‰āļšāļąāļ•āļĢāđ€āļ„āļĢāļ”āļīāļ•
āđāļžāđ‡āļāđ€āļāļˆ Free āđ„āļĄāđˆāļ•āđ‰āļ­āļ‡āđƒāļŠāđ‰āļšāļąāļ•āļĢāđ€āļ„āļĢāļ”āļīāļ•āđƒāļŠāđ‰āđāļšāļšāļ—āļ”āļŠāļ­āļšāļ™āļĩāđ‰āļŸāļĢāļĩ

āđ€āļāļĩāđˆāļĒāļ§āļāļąāļšāļ—āļĩāļĄāļšāļĢāļĢāļ“āļēāļ˜āļīāļāļēāļĢ

āđ€āļ‚āļĩāļĒāļ™āđāļĨāļ°āļ•āļĢāļ§āļˆāļŠāļ­āļšāļ‚āđ‰āļ­āđ€āļ—āđ‡āļˆāļˆāļĢāļīāļ‡āđ‚āļ”āļĒāļ—āļĩāļĄāļšāļĢāļĢāļ“āļēāļ˜āļīāļāļēāļĢāļ‚āļ­āļ‡ HireValid āđāļŦāļĨāđˆāļ‡āļ‚āđ‰āļ­āļĄāļđāļĨāļ—āļĩāđˆāļ•āļĢāļ§āļˆāļŠāļ­āļšāđāļĨāđ‰āļ§ . āļ­āđˆāļēāļ™āļ™āđ‚āļĒāļšāļēāļĒāļ”āđ‰āļēāļ™āļšāļĢāļĢāļ“āļēāļ˜āļīāļāļēāļĢ