Embedded Systems test for hiring
See how candidates reason about microcontroller design, firmware, and faults in device code.
- 10 мин.
- 15 вопросов
- Средний уровень
- Выбор из нескольких вариантов
- Вопросы на языке английский
- Телефон и компьютер
Короткий ответ
The Embedded Systems test is a timed check of practical knowledge for building and supporting software that runs on microcontrollers. It measures design trade-offs, peripherals, C for small devices, and fault finding. Use it with intermediate firmware and embedded software engineers, microcontroller developers, and other engineers who write or test device code.
Что оценивает
Knowledge of embedded design trade-offs, microcontroller peripherals, C for small devices, and finding and preventing faults in device code.
System design and trade-offs
Questions ask candidates to weigh design choices when timing, memory, and power are limited.
Microcontroller peripherals
Questions cover setting up on-chip peripherals on a microcontroller.
Firmware in C
Questions use short standard C code written for small devices.
Fault finding and verification
Candidates track faults from symptoms, signal traces, and short code listings, including how to prevent them.
Форматы вопросов
Выбор из нескольких вариантов
Кандидат: Читает краткое описание ситуации, таблицу или утверждение и выбирает правильный ответ или все правильные ответы.
Вы увидите: Знает ли кандидат материал настолько хорошо, чтобы применять его, а не просто узнавать.
15 вопросов за 10 минут, вопросы показываются по одному.
Для каких должностей подходит этот тест
Firmware and embedded software engineers, microcontroller developers, electronics engineers who also write device code, and test engineers working on embedded products.
Evidence from device-code decisions
See trade-offs in context
Questions put timing, memory, and power limits together, showing how candidates approach constraints found in embedded design.
Keep vendor familiarity from deciding
Each question describes a generic microcontroller and states the clock figures, register layouts, and data widths needed to answer it.
Review fault-finding approaches
Symptoms, signal traces, and short code listings show how candidates approach problems in device code.
C as written for small devices
Code is short standard C with fixed-width types, so you see whether a candidate reads data widths and register values correctly rather than which toolchain they know.
Что вы получите по каждому кандидату
- Вкладка с тестом оставалась открытой на протяжении всего теста
- Без вставленных ответов
- Ответы давались в ровном темпе
Оценки, профили и сигналы добросовестности - это данные для вашей оценки наряду с результатами собеседования, а не основание для автоматического решения.
Test integrity signals for review
Each candidate receives a different question set, with questions in a different order and answer options shuffled. The browser shows one question at a time, and answer keys stay on HireValid’s servers. The 10-minute timer runs on the server; reloading returns the same question with only the time left, and candidates cannot go back. Question text cannot be copied or selected, and blocked copy attempts are recorded. HireValid records signals such as time away from the test tab, pastes into answers, and answers faster than a question can be read. The employer reviews an Integrity Score and evidence timeline; the system does not decide on its own. With candidate consent, random webcam photos can be added. See how we build our tests.
Как мы предотвращаем списывание с помощью ИИ · Сигналы добросовестности
Use the score as one signal
Review the score alongside a work sample that reflects the device-code work in the role and a structured interview. The test is evidence for a person to consider, not a hiring decision by itself. Ask candidates to explain choices or investigate a scenario, then compare their reasoning with the work sample. For more guidance, see our pre-employment testing guide and the Clean Code test for a related programming skill.
Structured interview questions
How would you choose between two design approaches when timing, memory, and power constraints compete?
Listen for how the candidate weighs the stated constraints and explains the trade-offs behind a choice.
Walk me through how you would set up an on-chip peripheral for a device task.
Listen for a clear sequence of decisions and attention to the microcontroller details in the scenario.
A device shows a fault and you have a signal trace and a short C listing. How would you investigate?
Listen for a reasoned path from symptoms through the trace and code, plus how the candidate would verify a finding.
Tell me about a device-code fault you would try to prevent, and how you would approach that.
Listen for a concrete prevention approach tied to firmware or verification work, rather than a definition.
Разберитесь в оценках и сравнительных показателях
Справедливость и адаптация условий
Each question describes a generic microcontroller in its own text, stating the clock figures, register layouts and data widths it needs, so no single vendor's parts, tools or libraries give anyone an advantage. Code is short standard C with fixed-width types, the language is plain US English without idioms, units are metric, and the arithmetic is light enough for the scratch paper every candidate may use.
Вы можете предоставить любому кандидату дополнительное время в качестве адаптации. Результаты служат основанием для проверки человеком, а не для автоматического решения.
Provisional: reliability is reported once 200 candidates have completed it.
Подробности о тесте
A timed check of practical knowledge for building and supporting software that runs on microcontrollers. Questions cover design trade-offs under tight timing, memory and power limits, setting up on-chip peripherals, C code written for small devices, and tracking down faults from symptoms, signal traces and short code listings.
- Вопросы на английском языке.
- Разрешённые вспомогательные средства: Черновик.
- На каждый вопрос отвечают один раз, по порядку, без возможности вернуться назад.
- 4 тренировочных вопросов, 3 минут, перед тестом с ограничением по времени.
Часто задаваемые вопросы
How does the Embedded Systems test keep questions fair across microcontroller backgrounds?+
Each question describes a generic microcontroller and includes the clock figures, register layouts, and data widths needed for that question. The code is short standard C with fixed-width types. The wording uses plain US English without idioms, units are metric, and the arithmetic is light enough for scratch paper.
Can candidates use scratch paper on the Embedded Systems test?+
Yes. Every candidate may use scratch paper for the light arithmetic, such as working from the clock figures a question states. Each question is answered once, in order, with no going back to an earlier one.
What practice is available before the Embedded Systems test?+
Candidates can use a practice set of 4 questions with a 3-minute time limit. The actual test has 15 multiple-choice questions and a 10-minute time limit. The practice set gives candidates a chance to see the question format before the hiring assessment.
Which roles suit the intermediate Embedded Systems test?+
It is intended for firmware and embedded software engineers, microcontroller developers, electronics engineers who also write device code, and test engineers working on embedded products. It is set at an intermediate level, for people who already do this work.
Похожие тесты
Чистый код
10 минут, Навыки программирования
Изучите.NET
10 минут, Навыки программирования
ИзучитеGitHub
10 минут, Навыки программирования
ИзучитеОбъектно-ориентированное программирование
10 минут, Навыки программирования
ИзучитеПрограммирование: алгоритмы, начальный уровень
15 минут, Навыки программирования
ИзучитеПрограммирование: алгоритмы, средний уровень
35 минут, Навыки программирования
ИзучитеИспользуйте тест Встроенные системы при следующем найме
В каждом тарифе, включая Free, доступна полная библиотека тестов.